Skip to content
1. 3 Pack 16″x16″ (400mmx400mm) Square 3D Printing Build Surface Heat Bed with Adhesive for 3D Printers, Cuttable to Any Size
- 【PACK of 3】Our 3D Printer build plates are 16″ x 16″ (400mm x 400mm) square, fully matches heated bed on many popular 3D printers, such as Cr-10 S4, Formbot T-rex, Wombot Modus 3D printer, Creatbot, Tevo Black Widow, and also can cut to any small size you want.
- 【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production.
- 【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on to the building surface without the need for additional adhesives, tapes, or slurry.
- 【Fully Compatibly】 This 3D Printer heatbed platform sheet allows for multiple uses with either the same or different filament material. Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments. Reuse for multiple prints, just wipe down with isopropyl alcohol between prints for best results.
- 【SATISFACTION GUARANTEED】We’re so confident that you’ll love these premium print surfaces, that we offer lifetime technical support and 24 hours professional customer service.
2. Lowepro ProTactic 350 AW II Modular Backpack with All Weather Cover for Laptop Up to 13 Inch for Professional Cameras, Mirrorless, CSC and Drones, LP37176-PWW, Black
- Tough eva moulded top armoured section and protective padding all round the bag ensures equipment inside is protected
- Flexible and adaptive dividers inside allow multiple configurations of camera kit to be positioned with ease
- Modular: Includes two quick lock straps and a slip lock tripod cup to mount a tripod securely; also fits multiple accessories in the lowepro range with the slip lock system
- Comfortable carrying with the activzone system technology delivers targeted support at shoulder blades, lumbar and waist for all day carry comfort
- Protective laptop carrying with cradlefit pocket suspends and protects up to 15-Inch laptop for 450 and 13-Inch for the 350 model
- Rain protection: Safeguard valuable gear from the elements with the built-in all weather aw cover. External Dimensions-30 x 18 x 47 cm. Internal Dimensions-26 x 12.5 x 40 cm. Laptop Compartment Dimensions-24 x 1.8 x 34.5 cm
3. How to Rebuild Your Small-Block Chevy
4. Launching a Big Fat Greek Supertanker
5. Small-Block Chevrolet: Stock and High-Performance Rebuilds (Workbench How-to)
6. David Vizard’s How to Build Max-Performance Chevy Small-Blocks on a Budget (Performance How-To)
- How To Build Max Performance CHEVY Small Blocks On A Budget: CarTech Manual – Softcover
7. FYSETC 3D Printing Hotbed Flexible Steel Spring Sheet 13.7×13.7 inch/350mm Heated Bed Buildplate with PEI + Magnetic Base B Compatible with Voro 2.4
- Custom-designed PEI materials to make your print easy to adhere to the printing surface, flexible, removable, fit for most filament, include ABS PETG Wood TPU PLA etc. PEI is a very thin printing surface, so please Control well the distance between the nozzle and the PEI, then it won’t let you down.
- Note: Not for Ender 5Plus. Size: 350*350mm/13.7*13.7 inch, apply to the same size Voro 2.4 printer, may fit: Sovol SV03(Please measure your build plate,not reply on bulid volume before ordering). If can accept the torelance 0.5-1mm comparied with your printing area, just buy it.
- Comes with Strong Magnetic Base with adhesive, so you can heat your bed to high temps for specialty filaments and not worry about loss of performance. You also can cut it to fit for your any bed size.
- Before printing, please remove the protect film which stick on the PEI surface, attach to your print bed via the Magnetic Mounting Base, if necessary, perform a one-time z-height adjustment, and begin printing. When printing is complete, simply remove the FlexPlate, flex, and pop your prints off!
- Kindly Tips: Please tear off the surface protector which stick on the PEI surface. The PEI side is printing side, We have helped you stick PEI on the steel plate, use machine, so you no longer need to worry about bubbles. if you received package but found the air bubbles or Scratches, please don’t worry, they are the surface layer, PEI will not be affected.
8. Nintendo Switch – OLED Model w/ White Joy-Con
- 7-inch OLED screen – Enjoy vivid colors and crisp contrast with a screen that makes colors pop
- Wired LAN port – Use the dock’s LAN port when playing in TV mode for a wired internet connection
- 64 GB internal storage – Save games to your system with 64 GB of internal storage
- Enhanced audio – Enjoy enhanced sound from the system’s onboard speakers when playing in Handheld and Tabletop modes.
- Wide adjustable stand – Freely angle the system’s wide, adjustable stand for comfortable viewing in Tabletop mode. Nintendo Switch – OLED Model supports all Joy-Con controllers and Nintendo Switch software
9. COMGROW Creality Ender 5 Plus 3D Printer with BL Touch, Tempered Glass Plate and Touch Color Screen, Large Build Volumn 350X350X400mm
- Auto Bed Leveling Pre-Installed – You just plug them in and start printing! It can precisely measure the tilt of the Bed surface, offers the automatic compensation for Z-axis for unevenness of the platform plate, easy to solve the printing failure caused by the unevenness of the platform and provid reliable operation with all build surfaces.
- Ultra Large Printing Format – Meet more of your printing requirement. Your idea should not be confined. Achieve better print results and a larger print model at a time. Cube FrameBox design with overhead gantry.A plus size and upgraded version of Ender-5 printer.
- Solid Cube Frame – Dual Y-axis synchronization and equipped with a 42-48 motor. Strong power support and smoother transmission lexible and reliable. Dual Z-Axis Lead screw drive smoothly and steady.Movement of the build plate will be more stable.
- Easy to Install & Use – Ender 5 Plus comes with several partially assembled kits, very easy to assemble and allow you to learn about the basic construction of 3D printer. And it with 4.3Inch Touch Screen for easy and quick operation.
- Printing Resume & Filament End Sensor – Safely protect the power supply.with this function can help achieving long time printing. To avoid occasional printing errors, you’re better off with a sensor that lets you know whenever your filament breaks, runs out, or gets tangled on the spool.
10. Academy USS Oliver Hazard Perry FFG-7
- 1/350 scale, 15″ hull
- Highly detailed, accurate superstructure
- Can be built full hull, or waterline option
- Two SH-60 anti-submarine helicopters
- Finely engraved mast and Radars
