Skip to content
1. Texas Speed TSP Stage 1 Low Lift Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft and Springs Only)
- Texas Speed Low Lift 208/214, .550/.550, 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). These camshafts have a 3-bolt timing gear pattern. Includes Camshaft and Beehive Springs
- This cam gained 45.1 HP and 21.5 TQ at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!
- This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market! It is a great choice for those looking for a sleeper camshaft for their 4.8L or 5.3L
- 1200-5600 RPM Power Band; This is an excellent performance camshaft with a smooth idle! We’ve had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you’re looking for a small, stealth camshaft the 208/214 is a great option to consider. It is ideal for 4.8L and 5.3L trucks that want to keep their factory torque converter and not break the bank on more expensive valve springs and pushrods.
- These cams are designed specifically for 4.8 5.3 6.0 combinations.
2. Brian Tooley BTR Stage 2 Truck Camshaft Springs, Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Spring Set and Gasket Kit)
- Brian Tooley 2 BTR Stage 2 Truck Cam V2 212/218 .553″/.553″ 111 99-13 GM Truck Applications Beehive Springs and Cam Install Gasket Kit
- Camshaft, Beehive Springs, Seals, Crank Bolt, Gaskets for Water Pump, Timing Cover, & Front Seal. These camshafts have a 3-bolt From toy haulers to trucks turned street rods, our V2 truck cam lineup has an answer for your needs.
- From toy haulers to trucks turned street rods, our V2 truck cam lineup has an answer for your needs. We have partnered with an OEM Tier 1 supplier to grind the new V2 series. The end result is a revised camshaft that provides more average torque, higher peak power, and a maximum depth heat treatment.
- The maximum heat treat depth is achieved by having cam cores made within a few thousandths of final grind size. As opposed to grinding all the camshafts from the same starting core, they each have their own respective core to begin.
- The Stage 2 grind is a great middle-ground for people looking for added power, while keeping OEM driving characteristics in check. OEM torque converters play happily with these grinds. If you need to hook up to a trailer and hit the road for the weekend, this grind will give you more average torque than the previous iteration of the truck series.
3. Brian Tooley Racing BTR Truck Stage 2 Cam Beehive Springs and Pushrod Kit Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2
- BRIAN TOOLEY RACING BTR TRUCK STAGE 2 CAM Beehive Springs and Pushrod KIT 4.8 5.3 6.0
- The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, PAC Racing Beehive Valve Springs and New Set of VS LS Hat Seals, 7.400 Chromoly Pushrods
- Cam Specs: 212/218 .553″ .533″ 111 The Stage 2 grind is a great middle-ground for people looking for added power, while keeping OEM driving characteristics in check. OEM torque converters play happily with these grinds. If you need to hook up to a trailer and hit the road for the weekend, this grind will give you more average torque than the previous iteration of the truck series.
- Excellent for 4.8 5.3 6.0 6.2 Silverado, Sierra, Yukon, Tahoe, Suburban, Escalade
- Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance.
4. Texas Speed TSP Stage 2 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft and Springs Only)
- Texas Speed Stage 2 Low Lift 212/218, .550″/.550″ 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). These camshafts have a 3-bolt timing gear pattern.
- This cam gained 51.4 HP and 22.9 TQ at the flywheel on the in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!
- This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market.
- 1200-5800 RPM Power Band; This is an excellent performance camshaft with a smooth idle! We’ve had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you’re looking for a small, stealth camshaft the 212/218 is a great option to consider.. It is ideal for 4.8L and 5.3L trucks that want to keep their factory torque converter and not break the bank on more expensive valve springs and pushrods.
- These cams are designed specifically for 4.8 5.3 6.0 combinations.
5. EngineTech CC426 Cam Bearings GM 4.8L 5.3L 5.7L 6.0L GEN III
- Enginetech camshaft bearings are manufactured as a ÒFull RoundÓ design. Our bearings are produced from extruded steel tubes with a centrifugally cast Babbitt lining. Several different grades of Babbitt are used depending on applications. Engines with inherent OE problems of bearing wiping and/or fatiguing utilize a high grade ASTM-14 material.
6. Comp Cams 54-703-11 Stage 2 Thumpr Cam for GEN IV LS 4.8/5.3/6.0L Trucks, camshaft only
- Developed and Tested on the Dyno – Adds 89 Horsepower when used with properly matched CK and MK kit components.
- High RPM Potential – LST camshafts accel in the 6,700 to 7,300 RPM range, allowing engines not only to turn more RPM, but also to make more power in this range.
- No Guesswork – Properly matched components in CK and MK kits completely remove any guesswork in selecting the rest of the valve train.
- Fit type: Vehicle Specific
7. Brian Tooley Racing BTR Truck Stage 1 Cam and Beehive Spring Kit LS 4.8 5.3 6.0 Fits Silverado Sierra Vortec
- Brian Tooley Racking BTR Truck Stage 1 V2 Cam Kit 4.8 5.3 6.0 Cam and Beehive Spring Set Our V2 series was born from the demands of an ever changing market. From toy haulers to trucks turned street rods, our V2 truck cam lineup has an answer for your needs.
- The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 1 Truck Cam, Beehive Springs and Set of VS LS Hat Seals
- Our Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.
- The Stg 1 cam is our entry level cam for use in pratically any LS engine where great low speed torque is desired. With it’s narrower LSA, this cam will make more low end torque than a production LS6 cam will.
- This is a step-up from the LM7 stock cam. Recommended for trucks used for towing and wanting for torque over stock. SPECS: 206/212 .553/.553 112+0
8. Brian Tooley Racing BTR Truck Stage 3 Cam and Beehive Spring Kit 4.8 5.3 6.0 Fits Silverado Sierra Vortec
- Brian Tooley Racing BTR Truck Stage 3 Cam Kit 4.8 5.3 6.0 Camshaft, Beehive Springs and LS Valve Seals
- The Brian Tooley Racing Truck Cam Kit includes: Stage 3 Truck Cam, Beehive Racing Springs and Set of VS LS Hat Seals
- These Vortec Truck cams require a 3-bolt timing gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.
- The Stage III cam has a noticeable cam sound that so many are looking for. It will make even more average torque than the Stage II cam, at the sacrifice of some low end torque and fuel mileage.
- Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance. Specs are 218/224 .553/.553 110+0
9. Brian Tooley Racing BTR Truck Stage 3 Cam Beehive Springs and Pushrod Kit Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2
- Brian Tooley Racing BTR Stage 3 Truck Cam, Beehive Springs and 7.400″ Chromoly Pushrods 4.8 5.3 6.0
- The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 3 Truck Cam, Beehive Springs, Set of VS LS Hat Seals, 7.400 Chromoly Pushrods
- Stage III Camshaft Specs Specs: 218/224 .553/.553 110+0 Requires a 3 bolt timing gear.
- STAGE 3 SPECIFICS: The Stage 3 V2 camshaft is an amazing all around grind for the truck enthusiast. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, but gain an idle note that is distinctly BTR! Stage 3 grind, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. An aftermarket converter is highly recommended with this grind.Excellent for 4.8 5.3 6.0 6.2 Silverado, Sierra, Yukon, Tahoe, Suburban, Escalade
- Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance.
10. Texas Speed TSP Stage 3 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0,Includes GM LS6 Single Beehive Valve Springs, Set of 16 and Gasket Set Kit (Camshaft, Springs and Gasket Kit)
- Texas Speed Stage 3 Low Lift 216/220, .550″/.550″ Camshaft 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). Beehive Valve Springs, Set of 16 Hat Seals. and Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal. These camshafts have a 3-bolt timing gear pattern.
- This cam gained 53.4 HP and 22.0 TQ at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!
- This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market!
- 1400-6000 RPM Power Band; This is an excellent performance camshaft with a slight lope at idle! We’ve had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! A mail-order or dyno tune will be required for optimum performance and excellent driving quality.
- These cams are designed specifically for 4.8 5.3 6.0 combinations.
