Skip to content
1. Fel-Pro ES 72856 Cylinder Head Bolt Set
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Properly torque bolts per manufactures specifications
- Follow recommended tightening sequence for head bolts
- Check bolt length for correct application needed
- Follow all vehicle manufacturers recommendation procedures for head bolt replacement
- 1 year manufacturers warranty
2. EVIL ENERGY 6AN Male Flare to 3/8″ Fuel Hardline Tube Fitting Adapter Connector Aluminum Alloy Black Anodized Straight
- Fuel hardline fitting: Only compatible with hard tube.
- Size: 6AN to 3/8 inch,the thread size of the 6AN is 9/16UNF.It’s fits to 3/8″ OD hardline,please measure before perchase.
- Material: Made of aluminium alloy fitting and brass ferrule.
- Application: This 3/8 hardline to 6an fitting is widely used in Brake System / Air & Fuel Delivery/ Engine Modification / Oiling System / Cooling System.
- Maximum working pressure: 4000PSI,Working temperature: -65°F to 252°F.
3. MAS Ignition Distributor w/ Cap & Rotor compatible with Ford 351C 351M 400 429 460 HEI 65,000 Volt Coil KA-1046013 PE332U JM6506BL 351CBLHEI0 (BLUE)
- 65,000 volt coil to ensure accurate and reliable timing to 7,500 RPM
- True spark alignment for instant throttle response
- Built in high performance ignition module Will interchange with any regular HEI cap
- One Wire Installation, blue cap or red cap
- Fully CNC machined and polished housing with adjustable vacuum advance.
4. Edelbrock 61629 Cleveland Small Block Cylinder Head
- Complete Single For Hydraulic Flat Tappet
- 60cc Combustion Chamber Volume
- 190cc Intake/90cc Exhaust Runner Volume
- 2. 05 in. Intake/1. 6 in. Exhaust Valve Diameter
- 0. 625 in. Deck Thickness
- Fit Type: Vehicle Specific
5. RJSPHH Adjustable range of the push rod length checker is 6.80″ to 7.80″
- re crafted from a steel alloy with black oxide coating for years of accurate measurements.
- They are easy to read and eliminate the need for expensive calipers.
- Having the correct pushrods in your engine is a critical factor in proper rocker arm geometry, and this is the best tool to measure pushrod length
- Individual Length Checker Adjustable Range: 6.800″ to 7.800″
- 1 X Pushrod Length Checker
6. BLACKHORSE-RACING Exhaust Manifolds Automotive Replacement Engine Stainless Clipster Header Manifold Exhaust Gaskets for Chevy Small Block SBC A F G 5.0L 5.7L 6.0L
- ♐ Designed to fit the Chevrolet Small Block 262, 265, 267, 283, 302, 305, 307, 327, 350 & 400 V8 Engine.Not for 40 ford
- ♐ Hugs the block for a closer fit and extra clearance
- ♐ Headers features 8-2 light weight design.
- ♐ Designed to fit many vehicles and not specific to the ones below.
- ♐ Primary Tube Size: 1 5/8″. Number of O2 Sensor Locations: 0
7. Edelbrock 5089 Cylinder Head
- Complete Pair For Hydraulic Flat Tappet
- 64cc Combustion Chamber Volume
- 2. 02cc Intake/60cc Exhaust Runner Volume
- 2. 02 in. Intake/1. 6 in. Exhaust Valve Diameter
- 0. 562 in. Deck Thickness
8. Edelbrock 2116 Performer Vortec Aluminum Intake Manifold
- Have provisions for external water bypass
- No provision for exhaust-heated chokes
- Improves torque over a wide RPM range of 5, 500
- Accepts both square-bore and spread-bore carburetors
- Accepts late model water neck, alternator, HEI and air conditioning
9. Edelbrock 2701 Performer Intake Manifold
- Made of aluminum with a natural finish
- Dual plane intake style
- RPM range is idle to 5, 500 RPM
- Single carburetor without EGR
- Use on stock or original equipment standard deck
- Fit type: Vehicle Specific
10. ICT Billet Torque Plate Compatible with Ford Small Block V8 260 289 302 351 400 Cleveland Windsor Cylinder Boring Honing 351C, 351W, 351M SBF 551300-SBF01
- Accurately bore your cylinders with ICT torque plates
- Heavy Duty Billet Aluminum Provides the Equal Clamping Distribution Required for Accuracy
- Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum
- Torque Plates Must be Used when Boring an Engine to keep the Cylinder Round (this Plate Simulates the Cylinder Head Being Bolted Down Which Distorts the Cylinder Shape)
- Improve Your Cylinder Wall to Piston Sealing by Using a Torque Plate
