Top 10 Best Mr2 Spyder Coilovers With Expert Recommendation

by

1. Rev9 R9-HS2-049_1 Hyper-Street II Coilover Suspension Lowering Kit, Mono-Tube Shock w/ 32 Click Rebound Setting, Full Length Adjustable, compatible with Scion tC (AGT20) 2011-16

Rev9 R9-HS2-049_1 Hyper-Street II Coilover Suspension Lowering Kit, Mono-Tube Shock w/ 32 Click Rebound Setting, Full Length Adjustable, compatible with Scion tC (AGT20) 2011-16Buy On Amazon
  • Compatible With Scion tC (AGT20) 2011 2012 2013 2014 2015 2016
  • Spring Rate: Front – 8 kg/mm (448 lbs/inch) | Rear – 5 kg/mm (280 lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount // Damping Levels: 32 Ways
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment; Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately
  • These Coilovers are “Lowering Kit” and DOES NOT adjust to Factory Ride Height. No Installation Instructions; Install By Experienced Professionals Recommended

2. BC Racing 2000-2005 Toyota MR2 Spyder BR Series Coilovers (C-18-BR)

BC Racing 2000-2005 Toyota MR2 Spyder BR Series Coilovers (C-18-BR)Buy On Amazon
  • The BR Series Model is the perfect choice Compatible with street driving and the occasional road course or autocross duty.
  • With easily accessible adjustment knobs for fine-tuning compression and rebound, ride height adjustment independent of shock stroke and spring preload, having a performance coilover system has never been easier.

3. MMX3920 MAXX Coilovers Lowering Kit, Fully Adjustable, Ride Height, 40 Damping Settings, compatible with Toyota MRS 2000-05

MMX3920 MAXX Coilovers Lowering Kit, Fully Adjustable, Ride Height, 40 Damping Settings, compatible with Toyota MRS 2000-05Buy On Amazon
  • Compatible With Toyota MRS (SW30) 2000 2001 2002 2003 2004 2005 2006 2007; Spring Rate (F/R): 4 kg/mm (224 lbs/inch)/8 kg/mm (448lbs/inch)
  • Top Mount(Front): Yes, Adjustable Camber Plate With Pillow Ball /// Top Mount(Rear): Yes, Standard Top Mount
  • Lowers Vehicle From 30-60 mm (lowers may varies depneds on car chassis, NOT SUPER LOW TYPE or Match Factory Ride Height)
  • SAE9252 Steel Performance Springs With Upgrade Spring Rate Combined With 40 Ways Shock Damping Settings to Improve Overall Handling And Ride Quality. CNC Machined Aluminum And Carbon Steel Hardware Accessories; Large Capacity 52mm Steel Shock Body With Anti-Corrosion Coating Filled With Italian IP F.A. Made Shock Oil Provides High Viscosity Index To Withstand Intense Track Usage And Outperformance for Everyday Driving Conditions.
  • Shock Damper Can Be Rebuilt or Replaced When Worn Out, Replacement Parts Are Available.; 12 Months Manufacturer Limited Warranty From Date Of Purchase, Parts Only.

4. Rev9 R9-HS2-004_2 Hyper-Street II Coilover Suspension Lowering Kit, Mono-Tube Shock w/ 32 Click Rebound Setting, Full Length Adjustable, compatible with Scion FR-S (ZN6) 2013-16

Rev9 R9-HS2-004_2 Hyper-Street II Coilover Suspension Lowering Kit, Mono-Tube Shock w/ 32 Click Rebound Setting, Full Length Adjustable, compatible with Scion FR-S (ZN6) 2013-16Buy On Amazon
  • Compatible With Scion FR-S (ZN6) 2013 2014 2015 2016
  • Spring Rate: Front – 8 kg/mm (448 lbs/inch) | Rear – 8 kg/mm (448lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount // Damping Levels: 32 Ways
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment; Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately
  • These Coilovers are “Lowering Kit” and DOES NOT adjust to Factory Ride Height. No Installation Instructions; Install By Experienced Professionals Recommended

5. BC Racing BR Coilovers 00+ Toyota MR2 SPYDER Chassis ZZW30

BC Racing BR Coilovers 00+ Toyota MR2 SPYDER Chassis ZZW30Buy On Amazon
  • Mono-tube shock design
  • 30 levels of damping force adjustment, adjust compression/rebound 2 axis bushings allow precise, single wrench adjustment accurately under load.
  • Front Spring Rate: 5kg/mm Rear Spring Rate: 7kg/mm
  • Front Camber Plates Included, Rear Camber Plates Not Applicable
  • Separate full length height adjustable, 1 year warranty and rebuildable

6. Detroit Axle – RWD Front Control Arms w/Ball Joints Sway Bars Tie Rods Kit Replacement for Chrysler 300 Dodge Challenger Charger – 16pc Set

Detroit Axle - RWD Front Control Arms w/Ball Joints Sway Bars Tie Rods Kit Replacement for Chrysler 300 Dodge Challenger Charger - 16pc SetBuy On Amazon
  • For RWD/2WD Models Only
  • Replacement for 2011-2014 Chrysler 300 – [2011-2014 Dodge Challenger] – 2011-2014 Dodge Charger
  • Kit Includes: 4x Front Upper & Lower Control Arm w/ Ball Joint Assemblies + 2x Front Lower Control Arms (Rearward Position) + 2x Front Lower Ball Joints + 4x Front Tie Rods + 2x Front Sway Bars + 2x Boots
  • Detroit Axle Suspension components are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs
  • 10-Year Warranty.

7. Rev9 R9-HS2-039 Hyper-Street II Coilover Suspension Lowering Kit, Mono-Tube Shock w/ 32 Click Rebound Setting, Full Length Adjustable, compatible with Subaru Impreza WRX (GR/GV) 2008-14

Rev9 R9-HS2-039 Hyper-Street II Coilover Suspension Lowering Kit, Mono-Tube Shock w/ 32 Click Rebound Setting, Full Length Adjustable, compatible with Subaru Impreza WRX (GR/GV) 2008-14Buy On Amazon
  • Compatible With Subaru Impreza WRX(GR/GV) 2008 2009 2010 2011 2012 2013 2014
  • Spring Rate: Front – 8 kg/mm (448 lbs/inch) | Rear – 8 kg/mm (448lbs/inch) // Top Mount: Yes, Pillow Ball Camber Plate | Yes, Standard Top Mount // Damping Levels: 32 Ways
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment; Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately
  • These Coilovers are “Lowering Kit” and DOES NOT adjust to Factory Ride Height. No Installation Instructions; Install By Experienced Professionals Recommended

8. Detroit Axle – Front Strut Assembly + Rear Shock Absorbers + Sway Bar Links Replacement for Mazda 3 5 [Exc. Mazdaspeed] – 8pc Set

Detroit Axle - Front Strut Assembly + Rear Shock Absorbers + Sway Bar Links Replacement for Mazda 3 5 [Exc. Mazdaspeed] - 8pc SetBuy On Amazon
  • Replacement For – 2004-2009 Mazda 3 (Excluding MazdaSpeed) – [2006-2010 Mazda 5]
  • Kit Includes: (2) Front Complete Quick Strut & Spring Assembly, (2) Rear Shock Absorbers, (2) Front Sway Bar Links and (2) Rear Sway Bar Links
  • 10-Year Warranty
  • Complete Strut Assembly – Equipped with Strut, Coil, Spring & Mounts – Ready to Install
  • Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation

9. Godspeed MSS0131-B MonoSS Coilover Lowering Kit, Fully Adjustable, Ride Height, Spring Tension And 16 Click Damping, compatible with Acura RSX (DC5) 2002-06

Godspeed MSS0131-B MonoSS Coilover Lowering Kit, Fully Adjustable, Ride Height, Spring Tension And 16 Click Damping, compatible with Acura RSX (DC5) 2002-06Buy On Amazon
  • Compatible With Acura RSX (DC5) 2002 2003 2004 2005 2006
  • Spring Rate (Front/Rear) : 10 kg/mm || 12 kg/mm; Damping Levels: 16 Rebound Force Levels
  • 52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track
  • Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke; Powder Coated CNC Machined Aluminum And Carbon Steel Accessories; Independent Spring Tension And Height Adjustment; Racing Grade Shock Oil With High Viscosity Index; Shock Absorber Can Be Rebuild When Worn Out
  • Full 1 Year Limited Warranty From Date Of Purchase; Install By Experienced Professionals Is Highly Recommended

10. Sierra Auto Tops Convertible Top Replacement for Toyota MR2 Sypder 2000-2007, Cabrio Vinyl, Black

Sierra Auto Tops Convertible Top Replacement for Toyota MR2 Sypder 2000-2007, Cabrio Vinyl, BlackBuy On Amazon
  • Cabrio Grain Vinyl has been precision cut using automated computer controlled equipment for perfect fit
  • Stitched with matching colors using the finest bonded polyester threads
  • Includes new DOT rated glass window with embedded defroster wiring
  • Heat-sealed seams for added strength and durability
  • Factory die-cut plastic attachments with pre-drilled holes make installation faster and more accurate

Leave a Comment