Skip to content
1. Topteng Motorcycle Cylinder Piston Kit, Cylinder Piston Rings Top End Kit Set fits for Yamaha TTR 125 TT-R 125 LE 2000 2001 2002 2003 2004 2005
- Please confirm the part number before ordering. A complete top end kit is offered.
- Engineered and Tested to Meet or Exceed Original Equipment Standards and Performance.
- This kit is designed specifically for the DIY (Do It Yourself) mechanic. Cylinder is a Cast Aluminum 54.00mm Standard Bore Replacement with Steel Sleeve.
- Forged Piston With 11:1 Compression Ratio. Our Gaskets are all top quality and will keep a perfect seal between all of the components.
- The cylinder is cleaned, bored and honed to the specific clearances for the piston you receive in the kit. This kit includes a cylinder, piston, rings, wrist pin, circlips and top end gaskets.
2. LEXIVON Inch Pound Torque Wrench 1/4-Inch Drive | 20~200 in-lb/2.26~22.6 Nm (LX-181)
- PRECISION – Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE – Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING – Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE – Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE – Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
3. Sloppy Mechanics Stage 2 Camshaft Choose your kit! 4.8 5.3 5.7 6.0 6.2 LS LS1 LS2 LQ4 LQ9 Elgin 1840-P (Camshaft, Springs, Seals and Gasket Kit)
- Sloppy Mechanics Stage 2 Camshaft 228/230, 585″/.585″ 112 LSA Includes: Cam, Springs, Seals and Gasket Kit
- Fits all Gen 3/4 LS 4.8 5.3 5.7 6.0 6.2 including LS1 LS6 LS2 LQ4 LQ9
- The Sloppy Stage 2 Camshaft is a cam with a fairly aggressive profile. It will have a nice Lopey Idle and make tons of power all while keeping costs low. This cam is a great choice for those daily drivers that like a nice Lopey/Choppy idle. Great for Cars, Trucks, SUV’s, Street Rods, and LS Swaps.
- There is no hiding this cam as will will have a muscle car sounds to it. Everyone will take note of this street warrior. Automatic’s will perform best with a 2,600-2,800 Stall Converter. Choose the kit that is best for you. We have matched common components that are often used when installing this camshaft.
- Elgin Sloppy Stage 2 Camshaft. Camshaft, Springs and Seals: Camshaft with Matching Pac 1219 Springs and Valve Seals. Camshaft, Springs and Seals and Gaskets: plus our install Gasket Kit. Camshaft, Springs and Seals and Gaskets and Pushrods: Will include everything above plus Michigan Motorsports 7.400 5/16″ chromoly pushrods.
4. MAHLE B31822 Gasket
- All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
- MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
- MAHLE gaskets is the leader in Domestic, Asian and European applications
- The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
- 2006 – 2007 Camshaft retaining plate, flat type bolt holes (non recessed)
5. Yellow Jacket 60632 3/8 Drive Ratchet Head for Torque Wrench
6. BRIAN TOOLEY BTR Turbo LS Stage 2 Cam, Spring Kit with Titanium Retainers and Chromoly Pushrods – LS1 LS2 LS3 LQ4 LQ9 LM7 4.8 5.3 6.0 6.2
- Brian Tooley Camshaft, BTR Platinum dual springs with Lightweight Titanium Retainers, and 7.400 Chromoly Pushrods.
- Cam specs are 226/231 .610″/.608″ 113+4 and comes a 3 bolt timing gear pattern.
- When you need a little more RPM than the stage 1 can give you. If you have a light car wanting to push the limits, then this is the go to cam for your 5.3/6.0 S400 equipped combination.
- Springs: BTR Platinum Dual Spring Kit for LS engines using stock rocker arms. Includes dual polished springs, matching lightweight Titanium Retainers (faster reving than steel), Locators for stock guides, locks and seals.
- Pushrod Specs are: 7.400″ Long 5/16 Chromoly .080 Wall Pushrods by Brian Tooley Racing. Highly recommended when upgrading Camshafts.
7. ANCEL AD310 Classic Enhanced Universal OBD II Scanner Car Engine Fault Code Reader CAN Diagnostic Scan Tool-Black
- Classic design, fast scan and erase trouble codes, even a beginner can use it read the error code, find out what the problem is and perhaps fix it. Save money and time. It can not read and erase ABS, SRS(Airbag), and other systems fault codes.
- Works on MOST 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.
- Easily determines the cause of the check engine light. I/M monitor readiness test, turn off the MIL (check engine light) as well as view freeze frame data. Read hard (memory) / pending (intermittent) and historic codes and show definitions.
- The AD310 scanner is well built with a large LCD display (128 x 64 pixel) that has white backlight and contrast adjustment, indicates test results directly. No need any Batteries or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle.
- It’s equipped with a 2. 5 feet long cable and made of a very thick flexible insulator. There are 4 buttons on AD310. The Up and Down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu.
8. Hydraulic Roller LS9 Camshaft w/Cam Springs Seals Kit Fit For GM Performance LS/LQ 4.8/5.3/5.7/6.0/6.2 Turbo LS LSx Cam 12638427 12482063 by LAFORMO
- Fit For GM LS/LQ 4.8/5.3/5.7/6.0/6.2 ,
- Package includes Camshaft and Cam Springs Kits
- Part Number: 12638427 12482063
- Camshaft will fit for all Gen IV engines with proper valvesprings.
- IMPORTANT : Gen III engines require a Gen IV timing chain cover for cam position sensor!
9. NEIKO 03727A 1/4” Drive Beam Style Torque Wrench | 0-80 in/lb | 0-9 Newton-meters
- [UNIVERSAL]: Provides STANDARD (SAE) and METRIC (MM) readings, so there is no need for conversion charts.
- [PRECISION]: Precise torque readings in 0-80 in/lb in 1 in/lb increments, 0-9 Nm in .25 increments, so you can fasten nuts and bolts to the exact tightness specifications you need.
- [VERSATILE]: This performance tool can be used on bicycles, motorcycles, cars, boats and many more applications.
- [ACCURACY]: Quality manufactured to exacting standards, which ensures accuracy to within +/- 4%.
- [CONVENIENCE]: Ambidextrous for clockwise or counter-clockwise use.
10. RamPro 3/8” Drive Crowfoot Wrench Set, SAE/Inch (Standard) | Includes Sizes: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8 & 1 Inch | 10-Piece Kit with Clip Organizer.
- ✓ The Ram-Pro Durable Crow Foot Standard Inch Wrench Head Set will allow for easy access to nuts and bolts in tight spaces whereas Sockets can’t get to – Also included is an efficient clip-on Storage Rail designed specifically to hold all wrench’s and carrying around conveniently.
- ✓ SPECS: 3/8” Square Drive Open End Crows Foot Wrenches – Sizes Included (SAE/Standard): 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 1” – Full Length: 11” – Weight: 1.56 lbs. – Includes a Complete 10-Clip Wrench Organizer, for Better Storage Efficiency.
- ✓ QUALITY: Made in Taiwan and Manufactured with Drop Forged, Heat-Treated Steel will withstand up to 150 ft-lb. of torque for a long lasting life – High Quality Chrome Mirrored Finish – Heavy-Duty Construction for a perfect fit on the fasteners yet slim enough for the tightest areas.
- ✓ DESIGN: Chrome Plated Wrenches for Durability Improvement and Corrosion Resistance – Round Head Design Eliminates any stripping or splitting of the wrench and ensures a snug fit on the fastener – Sizes are carved onto each wrench for easy identification – Storage Organizer included, designed specially to hold the wrench’s in place when storing or using on jobs.
- ✓ USES: Crow’s Feet Wrench Adapters Speed up Installations & Removals, Fitting Perfectly on any 3-8” Drive Ratchet, Extension or Torque Wrench, Reaching inaccessible fasteners that sockets can’t get to – Great for Car Automotive & Truck Work in tight Engine/Radiator Areas like o2 sensors, or for underneath sink/toilet work like faucet spray hoses.
