Skip to content
1. Umbrella Corporation AeroShell 33MS / 64 Gun Grease .5oz / Mil-Spec for Barrel Nut Thread
- MIL-G-21164D for upper receiver threads, barrel nut installation and buffer tube installation
- High quality lube good for any number of applications, exercise equipment, hinges, reels, ball bearings, bicycle gears, even telescope mounts
- Aeroshell 64 / Aeroshell 33 MS sets the standard with exceptional anti-corrosion and anti-wear performance
- Our portable .88oz jar (.5oz grease) container makes for easy application of this AR grease with just the tip of your pinky finger
- Made to perform under extreme pressure and heat to prevent damage.
2. Feyachi Flip Up Iron Sight Front Rear Sight Compatible for Picatinny Rail and Weaver Rail of Rifle, Foldable Sights
- 【Simple Press to Flip up】Flip up your iron sights quickly with a simple press of the upgraded spring load button.
- 【Front Sight – Elevation Adjustment】A2 Front Sight is completely adjustable for Elevation.
- 【Rear Sight – Two Mode & Precise Aiming】Dual Aperture Design for switch between CQB and Precision. With the scale mark on the rear sight, you can rotate the knob to reach a proper postion for aiming.
- 【Perfect for Picatinny & Weaver Rail Mount】Especially designed for any hunting or tactical rifle with Picatinny Rail or Weaver Rail Mount including Winchester, Remington, Colt, etc.
- 【Made of Durable Aluminum】Made of high-quality aluminum alloy materials, these iron sights are tough and durable enough.
3. Ultralight Flip Up Sight 45 Degree Offset Rapid Transition Front and Backup Rear Sight
- Ultralight!!!! MADE of Polyphenylene sulfide is a semicrystalline material. Offers excellent balance of properties, durable and light
- After many tests and strength tests, it can be used for various gun products of high quality with convenient use and affordable price
- Good 45 DEGREE OFFSET PUSH BUTTON FLIPS UP WITH EASE – Sights are offset 45 degree to allow you to slightly rotate your rifle to witness target through them and engage. A simple press of the button and your iron sights will pop up quickly.
- This Sights with Low-Profile Design：Won’t Take Up Too Much Space or Interfere Other Accessories When It’s Flipped Up. These Angled Sights Work Perfect as a Backup Sight and Give You a Double Assurance
- For quick transition between iron sights and scopes. Fully adjustable for Windage. Both Precision and CQB apertures on rear sight with standard front sight, help to zero better in medium and short distance.
4. NcSTAR VTHAR10UVB Ar10 Upper Receiver Block, Multi
- Heavy duty contruction
- Reliable, durable performance
- Cutting edge innovation and input
- Package Weight: 2.0 pounds
5. NIDAYE QD Sling Swivel Mount – Sling Swivel with Base Rail Mounted Push Button/Sling Attachment for Picatinny/Weaver
- ★Alloy reinforced Picatinny / Weaver mounting base provides rock solid sling attachment point, this QD sling swivel mount perfectly fits 1 1/4inch slings
- ★Made of high-tensile aluminum alloy, ensure maximum durability under heavy use
- ★Easy to use this QD sling swivel mount, simply push button to quickly detach and attach sling, a very good 2 point traditional sling
- ★Swivel mount design allows for freedom of movement and quick transitions between carry methods
- ★If you have any problem, please don’t hesitate to contact us, we’ll reply within 24 hours
6. TACVASEN Men Windproof Softshell Tactical Hoodie Fleece Hunting Jacket Coat Army Green,US M
- Outershell: 100% polyester; Inner: soft fleece is Lightweight, Breathable
- Multi-Pockets: two shoulder pocket; forearm pocket on left arm; two front slash, zippered chest pockets; two zippered back pockets; vent zipper under each arm.
- Drawstring waist and hood. Elastic, hook & loop adjustable wrist cuffs
- Available in black, gray, army green ,khaki, CP and ACU. US Sizes S-2XL
- Great idea for military army outdoor tactical climbing hiking camping fishing hunting etc
7. SEDY 6-Pieces Roll Pin Starter Punch and Bolt Catch Install Punch Set, 1/16″, 5/64″, 3/32″, 1/8″
- 4Pcs roll pin starter punches: 1/16″, 5/64″, 3/32″, 1/8″, you have all the sizes needed to build the AR lower and upper receivers. Hollow end roll Pin Punch Set helps to prevent damage caused by an accidental slip off while getting the pin started, knurled Steel handles for sure grip in every application, align and start the pin, finish driving it with an impact punch.
- 2Pcs Blot Catch Install Punches: 3/32″, 5/32″, one with counter-bored tips to start roll pins and one with indexing tips to finish roll pins. Easy access to one hard to reach pin. Flat on one side for proper alignment without fear of damaging your gun.
- These Pin Punches are heat treated, drop forged and the electroplating process, hardened and knurled steel for greater durability, workability, and overall performance.
- This is a very cost-effective and special designed combo kit. You can get all the sizes you need when you fix the AR project. This set is ideal for AR platform or trigger guard, gas block, and forward assist.
- Using hand tools may be dangerous, please keep the items away from children pay attention to your own safety.
8. Universal Bench Block – Ideal for M1911 / M-1911 / M 1911 -Style Pistols, Glock, 10/22s and More – Ideal Armorers Block and Gun Smithing / Gunsmithing Tool Made With Non Marring Materials
- Made From High Quality Materials: Our universal bench block is molded from high-quality, purpose-specific, durable materials to provide a solid, non-marring work surface for gunsmithing on a wide variety of firearms. Built to last through use after use
- Suited for A Variety of Firearms: Perfect for disassembling and reassembling handguns. Ideally suited for M1911 / M 1911 / M-1911 -style pistols as well as other firearms (10/22s, Glocks, etc.)
- Custom Molded With Professionals In Mind: Notches, grooves and holes on both sides are designed to simplify a variety of tasks on your gun. Simplifies the installation of pins, detents and springs
- Useful For Many Tasks: Highly useful for drifting and staking assembly pins, barrel link pin removal, dressing the ejector port, staking the front sight, dressing the slide rails, removing hammer and sear pins, main spring removal, drifting the rear sight and more. One of the most versatile tools for your toolkit, alongside punch sets, sight removal kits, brass hammer, vise / vice sets, etc.
- Exceptional Quality & Great Value: Provides the same quality as Wheeler Engineering’s (TM) / Battendfeld Technologies’ (TM) universal armorers bench block. This is an aftermarket product manufactured by Impresa Products. Any other brands mentioned are for illustrative purposes only and are in no way affiliated with Impresa Products, nor do they endorse Impresa Products.
9. 9 Pieces Roll Pin Punch Set, Gunsmithing Kit Removing Repair Tool with Holder for Automotive, Watch Repair,Jewelry and Craft (9-Pieces)
- The high quality chrome-vanadium steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.
- Roll Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.
- 9pcs different size including 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing guns, small equipment, machines, and vehicles.
- Fitted nylon storage pouch:This 9pcs roll pin punch set tool kit come with Black carrying bag, easy to use, carry, storage or hang this tool set
- 12 hours quick customer service, please do not hesitate to contact us if you have any question or advice, we are always looking forward to satisfying you.
10. Wheeler Engineering Action Rod with One-Piece Aluminum Construction and Steel Contact Design and Locking Mechanism for Standard Gunsmithing and Assembly, Black, One Size
- DIMENSIONS: 12.25″ L x 1.25″ W x 2.25″ D
- EASE OF USE: Inserts into the upper part of gun and functions the same way as a bolt and locks into a standard barrel extension to ensure a solid fit and to prevent barrel deformation
- VERSATILITY: Can be used horizontally and vertically to align gun parts, or for overall maintenance and assembly
- DURABLE: Body is constructed of aluminum to ensure no damage is done to the receiver while working and the bolt interface is heavy-duty steel to ensure a solid connection within the barrel extension
- INNOVATIVE: Features a bolt interface twist lock for a strong connection and four flat sides for use in a vise
- GUARANTEED: This product is covered by a limited lifetime warranty provided by Wheeler. Please email support@wheelertools.com for assistance
