Skip to content
1. Edelbrock 7501 Performer RPM Air-Gap Intake Manifold
- Dual plane intake style with an Air-Gap
- Air-Gap design separates the runner from the heat of the lifter-valley cover
- Temperature sending unit boss clears all water necks
- No provision for exhaust heated chokes and no exhaust cross-over
- Will not fit under stock corvette hood and is meant for square bore carburetors
2. DNA Motoring CYLH-SBC-350 Aluminum Bare Cylinder Head Compatible with SBC Engines 302, 327, 350, 383
- REASONABLE DESIGN – High grade aluminum, bronze valve guides, hardened seats and advance port design for greater air flow. The head is lighter than iron heads, better to control air flow in and out of the cylinders and fuel deployment.
- HIGH PERFORMANCE – The 200cc intake runner with a 68cc combustion chamber improves performance and retains stock compression on 1970 and earlier. The addition of performance-oriented aftermarket heads can greatly improve the engine’s output.
- DURABILITY & USEFUL – The premium aluminum material can bear high pressure and high temperature. It is not easy to be deformed or cracked. In general, it will dissipate heat faster and will be easier to repair.
- PRECISE DIMENSION – Under through skillful casting process, the intake valve diameter is 2.02”, exhaust valve diameter is 1.60”. Designed for direct installation and replacement without modification.
- FITMENT – Compatible with SBC engines such as 302, 327, 350, 383 and 400 small block chevy engines up to 1986.
3. 2Pcs Straight Aluminum Bare Cylinder Head Compatible with Chevy Small Block 302/327/350/383/400 SBC 200cc Intake 68cc
- ▶️ High grade aluminum, bronze valve guides, hardened seats, advance port design for greater air flow
- ▶️ This head is 200cc intake runner with a 68cc combustion chamber, 68cc combustion chambers improve performance and retains stock compression on 1970 and earlier
- ▶️ Intake Valve Diameter: 2.020″ ; Exhaust Valve Diameter: 1.600″ ; Intake Port Volume: 200cc
- ▶️ Combustion Chamber Volume: 68cc ; Intake Port: Square ; Exhaust Port: Square
- ▶️ Lighter than Iron Heads. Each Head weighs 10.33kg ; 3-Angle Valve Seat ; Spark Plug Angle : Straight
4. Edelbrock 5089 Cylinder Head
- Complete Pair For Hydraulic Flat Tappet
- 64cc Combustion Chamber Volume
- 2. 02cc Intake/60cc Exhaust Runner Volume
- 2. 02 in. Intake/1. 6 in. Exhaust Valve Diameter
- 0. 562 in. Deck Thickness
5. Aluminum Intake Dual Plane Low Rise Intake Compatible With Ford Windsor 289 302 Windsor SBF Small Block
- Dual Plane Design
- Low Rise
- Durable and long lasting
- Basic Operating RPM Range: Idle-6,000
- Replaces Original Equipment (OE) number: 8124
6. Edelbrock 60779 Performer RPM Cylinder Head
- 63cc combustion chamber along with a 171cc intake port
- High-flow 2. 02″ intake valve and 1. 60 exhaust valve
- Includes phosphor-bronze valve guides, interlocking ductile iron valve seats
- Intake and exhaust runners are CNC-machine profiled for superior flow and performance
- Improved power throughout the RPM range for greater throttle response and top-end horsepower
- Fit type: Vehicle Specific
7. Remanufactured Cylinder Heads Assemblies GT40P 302 5.0L 4 Bar Genuine OEM SET/Pair NO CORE CHARGE NECESSARY
- Complete disassembly and thorough cleaning via hot tank & pressure tested to confirm casting integrity
- New valve seats installed as necessary
- New valve stem seals installed on all our heads & all valve guides are replaced with new ones as necessary.
- Valve job Performed with all required angles & vacuum tested seals to ensure perfect compression.
- All necessary parts are cleaned and inspected before final assembly to meet AERA specifications
8. Native Eyewear Hardtop Ultra XP Polarized Rectangular Sunglasses, Matte Black/Gray, 71 mm
- N3 Polarized lenses filter Blue light, minimizing haze so you get greater Clarity, color and contrast
- Co-injected molded native frames now seamlessly incorporate their grippy, comfortable molding right into the plastic
- Cushion nose pads ensure a soft feel and custom fit, regardless of nose shape or size
- Optimal fit for large to extra large Profiles
- Item shape: Rectangular
9. Flotek 203505 Aluminum Cylinder Head for Small Block Ford
- Package dimensions: 8.8 h x 24.1 l x 10.3 w (inches)
- Country of origin : united states
- Package weight: 27.0 pounds
- Package dimensions: 24.1 l x 8.8 h x 10.3 w (inches)
- Fit type: Universal Fit
10. PROAIM Mitchell Mount Base to 100mm Bowl Adapter | CNC Aluminum Mitchell Base Plate for 100mm Bowl Fluid Head (BP-302-00)
- Professional Industry Standard Mitchell Adapters – Provides a Secure Base
- Extremely Durable & Stable – CNC Aluminum Construction for Lifelong Performance
- Perfect Solution for converting your Mitchell-based gear to Bowl mount & Bowl Mount to Mitchell gear
- Tool-Less Design & Simple Operation – Saves Lot of Production Time
- Smart Concept – Will always keep up with the trend!
