Skip to content
1. AXLE SWAP KIT compatible with JEEP YJ and 8.8
- Swap an 8.8 axle into your YJ
- All the components in this kit were designed around the Ford 8.8 out of a 1986-1995 Ford Explorer
2. USA Standard Gear (ZA W24110) Replacement Axle Kit for Jeep 27-Spline Dana 30 Front Differential 4340 Chrome-Moly
- USA Standard 4340 Chrome-Moly replacement axle kit for TJ/XJ/YJ/WJ/ZJ front, Dana 30, 27 spline
3. MG21102 Red Dana Axle Tube Seal fits for 87-01 Jeep Cherokee,97-06 TJ, 87-95 97-17 Wrangler, 2018 Wrangler JK front axles，Pair (30/44)
- Helps prevent mud and debris from entering the front axle tube
- Crafted from red powder coated billet aluminum
- Use on Non-Vacuum Disconnect applications
- this kit will not fit models with cad system dis-connect front dana 30 axle’s
4. Sthus 12mm 255mm Front Rear Axle Fit PIT PRO Trail Dirt Bike QUAD ATV 50cc 110cc 125cc
- Fitment:12mm classic rear axle for 12 and 14 inch pit bike wheels
- Package Include:1 Pc rear axle
- Length (from the shoulder of the nut to the end of the thread) 255mm 10.04 inches Length of Threaded Section 27mm 1.06 inches Diameter 12mm 0.47 inches)
- Note:Please Compare Our Product Against Yours, Including Its Appearance, Size,Shape Before Ordering.Thank You.
- Weight:225g
5. Ruffstuff Specialties Axle Swap Kits (F 8.8″ 31 Spline)
6. Monroe SC2928 Magnum Steering Damper
- 1/2 inch Piston Rod: Heavy-duty nitro carburized rod for long service life
- All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction
- Full Displaced Valving: Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride
- Made in China
7. Yukon Gear & Axle (YA W24110) Replacement Axle Kit for Jeep XJ/TJ/YJ Dana 30 Front Differential 4340 Chrome-Moly
- BUILT TOUGH: 4340 Chrome-Moly Steel for Maximum Durability
- FITMENT: Yukon Front Dana 30 Replacement Axle Kit For Dana 30 (’84-’01 Xj, ’97 And Newer TJ, ’87 And Newer Wrangler) With 27 Splines
- HIGH STRENGTH: Yukon 4340 Chrome-Moly Axles Provide Up To 50% Increased Strength Over Stock Axles For Use In Extreme Performance Applications With Large Tires And High Horsepower
- HIGH QUALITY: Yukon’S 4340 Axles Are Manufactured Using The Latest Technologies And The Highest Quality Materials To Ensure High Strength And Long Life
- COMPLETE KIT: This Kit Comes With Inner And Outer Axles For Both Left And Right Sides Along With Dana U-Joint
- PEACE OF MIND: Limited Ten Year Warranty Covers Manufacturing Defects And Axle Breakage For Ten Years
- U-JOINTS: 1310 Lifetime U-Joints Included
- DEPENDABILITY: Yukon uses the latest in heat treatment technology and high quality alloys to maintain our competitive edge. In-house engineering and quality labs ensure every axle is of the highest strength and standards for track racing, boulder climbing, desert racing, sled pulling, or whatever moves you forward. Yukon’s 4340 chromoly axles are up to 37% stronger than other aftermarket axles and come with a lifetime warranty.
8. Axle Shaft Seal Installer – Compatible with Ford Vehicles – 1998-2004 F-250, F-350 Super Duty, F-450, F-550, Excursion 4×4 – Replaces 6695, T83T-3132-A1, 205-429 – Wheel Knuckle Vacuum Seal Tool Press
- Replacement Axle Shaft Seal Installer – This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4×4 vehicle.
- Compatible Replacement for Ford Vehicles – 2000, 2001 , 2002, 2003, 2004 Excursion 4×4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime.
- Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4×4, F-250, F-350, F450 and F-550 vehicles only.
- OEM Fit, Quality, Finish – While this is not a genuine OEM part, it is a direct replacement and will look, fit and work exactly like the factory part. Vacuum seals delicately works with the axle shaft and this axle shaft seal tool is produced to ensure proper installation to the wheel knuckle assembly, prevents damages on the new seal, saves time and a lot easier.
- Lifetime Warranty – This vacuum seal installer comes complete with a lifetime warranty. If the part ever fails on your 01 Excursion, 2003 F250, 99 F350, 04 F450 or 1998 F550 simply contact us for a replacement. Save time and money off of dealer prices by purchasing this part and taking advantage of our warranty.
9. Rough Country N3 Steering Stabilizer fits 87-06 Jeep Wrangler TJ YJ Cherokee XJ ZJ | 02-10 Silverado Sierra HD | 8731730
- Give your vehicle the Perfect Blend of Performance and Stability from Rough Country.
- Improves Control and Handling.
- Reduces “bump steer” and Vibration | Added Life to Tires, Ball Joints, and other Steering Components.
- Chrome hardened 18mm piston rod
- Backed by Rough Country’s 3 Year Warranty
10. Omix-Ada 18206.01 Pinion Angle Degree Wedge
- 6 Degree
- Aluminum
- Pair
- Limited 5 Year Warranty
