Top 10 Best Cam For 6.0 Vortec – Available On Market

by

1. Texas Speed TSP Stage 2 High Lift Vortec Truck Camshaft 4.8 5.3 6.0 Includes Spring Kit and Chromoly Pushrods (Camshaft and Spring Set)

2. Brian Tooley Racing BTR Truck Stage 1 Cam and Beehive Spring Kit LS 4.8 5.3 6.0 Fits Silverado Sierra Vortec

Brian Tooley Racing BTR Truck Stage 1 Cam and Beehive Spring Kit LS 4.8 5.3 6.0 Fits Silverado Sierra VortecBuy On Amazon
  • Brian Tooley Racking BTR Truck Stage 1 V2 Cam Kit 4.8 5.3 6.0 Cam and Beehive Spring Set Our V2 series was born from the demands of an ever changing market. From toy haulers to trucks turned street rods, our V2 truck cam lineup has an answer for your needs.
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 1 Truck Cam, Beehive Springs and Set of VS LS Hat Seals
  • Our Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.
  • The Stg 1 cam is our entry level cam for use in pratically any LS engine where great low speed torque is desired. With it’s narrower LSA, this cam will make more low end torque than a production LS6 cam will.
  • This is a step-up from the LM7 stock cam. Recommended for trucks used for towing and wanting for torque over stock. SPECS: 206/212 .553/.553 112+0

3. Texas Speed Stage 2 High Lift Truck Camshaft 4.8 5.3 6.0 (Camshaft, Springs, Seals and Pushrods)

Texas Speed Stage 2 High Lift Truck Camshaft 4.8 5.3 6.0 (Camshaft, Springs, Seals and Pushrods)Buy On Amazon
  • Texas Speed 212/218 .600/.600 Camshaft 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). These camshafts have a 3-bolt timing gear pattern.
  • These use lobes that are designed to be both beehive & double valve spring friendly.
  • This cam gained 62.2 HP and 29.1 TQ at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!
  • 1200-5800 RPM Power Band; This is an excellent performance camshaft with a smooth idle! We’ve had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be practically hidden with some exhaust systems!
  • If you’re looking for a small, stealth camshaft, the 212/218 is a great option to consider. It is ideal for 4.8L and 5.3L trucks that want to keep their factory torque converter.

4. Brian Tooley BTR Stage 2 Truck Camshaft Springs, Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Spring Set and Gasket Kit)

Brian Tooley BTR Stage 2 Truck Camshaft Springs, Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft, Spring Set and Gasket Kit)Buy On Amazon
  • Brian Tooley 2 BTR Stage 2 Truck Cam V2 212/218 .553″/.553″ 111 99-13 GM Truck Applications Beehive Springs and Cam Install Gasket Kit
  • Camshaft, Beehive Springs, Seals, Crank Bolt, Gaskets for Water Pump, Timing Cover, & Front Seal. These camshafts have a 3-bolt From toy haulers to trucks turned street rods, our V2 truck cam lineup has an answer for your needs.
  • From toy haulers to trucks turned street rods, our V2 truck cam lineup has an answer for your needs. We have partnered with an OEM Tier 1 supplier to grind the new V2 series. The end result is a revised camshaft that provides more average torque, higher peak power, and a maximum depth heat treatment.
  • The maximum heat treat depth is achieved by having cam cores made within a few thousandths of final grind size. As opposed to grinding all the camshafts from the same starting core, they each have their own respective core to begin.
  • The Stage 2 grind is a great middle-ground for people looking for added power, while keeping OEM driving characteristics in check. OEM torque converters play happily with these grinds. If you need to hook up to a trailer and hit the road for the weekend, this grind will give you more average torque than the previous iteration of the truck series.

5. Brian Tooley Racing BTR Truck Stage 3 Cam Beehive Springs and Pushrod Kit Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2

Brian Tooley Racing BTR Truck Stage 3 Cam Beehive Springs and Pushrod Kit Fits Silverado Sierra Vortec 4.8 5.3 6.0 6.2Buy On Amazon
  • Brian Tooley Racing BTR Stage 3 Truck Cam, Beehive Springs and 7.400″ Chromoly Pushrods 4.8 5.3 6.0
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 3 Truck Cam, Beehive Springs, Set of VS LS Hat Seals, 7.400 Chromoly Pushrods
  • Stage III Camshaft Specs Specs: 218/224 .553/.553 110+0 Requires a 3 bolt timing gear.
  • STAGE 3 SPECIFICS: The Stage 3 V2 camshaft is an amazing all around grind for the truck enthusiast. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, but gain an idle note that is distinctly BTR! Stage 3 grind, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. An aftermarket converter is highly recommended with this grind.Excellent for 4.8 5.3 6.0 6.2 Silverado, Sierra, Yukon, Tahoe, Suburban, Escalade
  • Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance.

6. Texas Speed TSP Stage 3 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0,Includes GM LS6 Single Beehive Valve Springs, Set of 16 and Gasket Set Kit (Camshaft, Springs and Gasket Kit)

Texas Speed TSP Stage 3 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0,Includes GM LS6 Single Beehive Valve Springs, Set of 16 and Gasket Set Kit (Camshaft, Springs and Gasket Kit)Buy On Amazon
  • Texas Speed Stage 3 Low Lift 216/220, .550″/.550″ Camshaft 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). Beehive Valve Springs, Set of 16 Hat Seals. and Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal. These camshafts have a 3-bolt timing gear pattern.
  • This cam gained 53.4 HP and 22.0 TQ at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!
  • This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market!
  • 1400-6000 RPM Power Band; This is an excellent performance camshaft with a slight lope at idle! We’ve had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! A mail-order or dyno tune will be required for optimum performance and excellent driving quality.
  • These cams are designed specifically for 4.8 5.3 6.0 combinations.

7. Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Valve Seals

Brian Tooley Racing BTR Vortec Truck Stage 2 Cam and Spring Kit 4.8 5.3 6.0 Includes Beehive Springs and Valve SealsBuy On Amazon
  • Brian Tooley Racing BTR Truck Stage 2 Camshaft Kit 4.8 5.3 6.0 Camshaft and Beehive Springs and Valve Seals
  • The Brian Tooley Vortec Racing Truck Cam Kit includes: Stage 2 Truck Cam, Beehive Springs and LS Hat Seals
  • These Vortec Truck cams use a 3 bolt cam gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.
  • The Stage II cam has more of a noticable idle, with even more average torque production than the Stage I cam, at the sacrifice of some low end torque and fuel mileage.
  • This is the largest cam we recommend to run with stock 4L60E converter in a 4.8/5.3. Specs are 212/218 .553/.553 111

8. Brian Tooley Racing BTR Truck Stage 3 Cam and Beehive Spring Kit 4.8 5.3 6.0 Fits Silverado Sierra Vortec

Brian Tooley Racing BTR Truck Stage 3 Cam and Beehive Spring Kit 4.8 5.3 6.0 Fits Silverado Sierra VortecBuy On Amazon
  • Brian Tooley Racing BTR Truck Stage 3 Cam Kit 4.8 5.3 6.0 Camshaft, Beehive Springs and LS Valve Seals
  • The Brian Tooley Racing Truck Cam Kit includes: Stage 3 Truck Cam, Beehive Racing Springs and Set of VS LS Hat Seals
  • These Vortec Truck cams require a 3-bolt timing gear and were designed with low lift so GM LS2, LS3 and LS6 springs and pushrods can be used, making these the most affordable truck cams available.
  • The Stage III cam has a noticeable cam sound that so many are looking for. It will make even more average torque than the Stage II cam, at the sacrifice of some low end torque and fuel mileage.
  • Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance. Specs are 218/224 .553/.553 110+0

9. Texas Speed TSP Stage 2 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft and Springs Only)

Texas Speed TSP Stage 2 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0 (Camshaft and Springs Only)Buy On Amazon
  • Texas Speed Stage 2 Low Lift 212/218, .550″/.550″ 112 LSA Camshaft. With a 112 Lobe Separation Angle (LSA). These camshafts have a 3-bolt timing gear pattern.
  • This cam gained 51.4 HP and 22.9 TQ at the flywheel on the in-house SuperFlow 902 engine dyno using an otherwise stock 5.3L engine!
  • This cam uses proprietary TSP lobe profiles that are designed to utilize the factory GM LS6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market.
  • 1200-5800 RPM Power Band; This is an excellent performance camshaft with a smooth idle! We’ve had tons of customers select this camshaft when looking for a cam that drives almost stock, and can be hidden with some exhaust systems! If you’re looking for a small, stealth camshaft the 212/218 is a great option to consider.. It is ideal for 4.8L and 5.3L trucks that want to keep their factory torque converter and not break the bank on more expensive valve springs and pushrods.
  • These cams are designed specifically for 4.8 5.3 6.0 combinations.

10. Texas Speed TSP 228R 228/228 .600″/.600″ Camshaft, Spring Kit, Chromoly Pushrods, and Gasket Set. 4.8 5.3 5.7 6.0 LS Cam (Camshaft, Spring Kit, and Gasket Set)

Buy On Amazon
  • Texas Speed TSP 228R 228/228 .600″/.600″ 112 LSA Camshaft 4.8 5.3 5.7 6.0 LS Cam
  • Includes TSP .660″ Dual Spring Kit w/ PAC Racing Polished Springs, Titanium Retainers, Hardened Spring Seats, and New Valve Stem Seals, Crank Bolt & Gaskets for Water Pump, Timing Cover, & Front Seal
  • The 112LSA helps to bring the camshafts powerband lower in the rpm band. The lower LSA also creates a slightly rougher idle.
  • The 228R camshaft is a very popular camshaft for customers wanting a very streetable camshaft that makes approximately 5-7 more horsepower than the 224R camshaft.
  • Dyno testing has shown the 228R camshaft to make a solid 45-50rwhp gains. The 228R camshaft is large enough that we recommend a larger than stock stall converter in automatic cars. Tuning will also be required in both automatic & manual applications.

Leave a Comment