Top 10 Best Cam For Stock 350 Sbc With Buying Guide

by

1. Lunati 10120102LK Bare Bones 224/234 Hydraulic Flat Cam/Lifter Kit for 262-400 Chevrolet Small Block

Lunati 10120102LK Bare Bones 224/234 Hydraulic Flat Cam/Lifter Kit for 262-400 Chevrolet Small BlockBuy On Amazon
  • Noticable idle, great mid range and upper RPM power. Great for street performance or mild bracket racing
  • 2000 – 6000 RPM Operating Range
  • 224/234 Duration at .050″. 112 Degree Lobe Separation Angle. 0.465″/0.488″ Valve Lift
  • Lunati Cam and Lifter Kits include a camshaft, a set of lifters, instructions and assembly lubricant.
  • Budget Conscious Power Production – Ideal for budget minded hotrodders, the Lunati Bare Bones camshaft series delivers serious horsepower increases without breaking the bank.
  • Modern Profile – Thanks to an asymmetrical lobe design, the Lunati Bare Bones line greatly increases throttle response and acceleration.
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer.
  • Made in USA
  • Hydraulic Flat Tappet
  • Noticeable idle, great mid range and upper RPM power
  • Manufactured In United States

2. Big-Autoparts SBC Harmonic Balancer Bolt Small Block Damper for Chevy 280 305 350 383

Big-Autoparts SBC Harmonic Balancer Bolt Small Block Damper for Chevy 280 305 350 383Buy On Amazon
  • Harmonic Balancer Bolt High hex head prevents socket slippage when adjusting valves or rotating the engine to degree in a cam.
  • Extra thick parallel ground washer delivers a smoother more accurate more uniform torque.
  • Block Damper Designed specifically for small block Chevy.
  • Balancer Bolt Ideal for high performance drag race and circle track applications.
  • Balancer Bolt Harmonic Comes complete with split lock washers to prevent any loosening caused by vibration.

3. Michigan Motorsports 7.800″ Std Length HP OEM Replacement Pushrod Set of 16 Fits Chevy SBC 400 383 350 327 305 283 401

Michigan Motorsports 7.800Buy On Amazon
  • 7.800″ Std Length Pushrods Chevy SBC 400 383 350 327 305 283 OEM Replacement
  • Perfect for any Cam or Rocker upgrades – easy to install
  • Set of 5/16″ diameter push rods in 7.800″ stock length that are guide plate compatible. Made in the USA. Set comes with 16 pushrods.
  • These pushrods were used in many of the following small block
  • Chevy V8 engines as well as many GM, Buick, Cadillac, GMC, Oldsmobile and Pontiac applications that used the Chevy engines. They also fit some AMC and Wrangler V8 engines.

4. Chevy Big-Blocks: How to Build Max Performance on a Budget (Sa Design)

5. Chevy SBC 350 5.7L HP RV 420/433 Camshaft Lifters & Timing Kit Torque MC1730

Chevy SBC 350 5.7L HP RV 420/433 Camshaft Lifters & Timing Kit Torque MC1730Buy On Amazon
  • ENGINE PRO MC1730 Hydraulic Flat Tappet Stage 2 Camshaft, Lifters, and Double Roller Timing Set for 1958-1995 Small Block Chevrolet Engines – 262, 265, 267, 283, 302, 305, 307, 327, 350, 400
  • Smooth Idle with Good Low and Mid Range Torque, 1800-2600 RPM. 1500-4000 RPM Power Range. Strong Torque and Good Mileage in 327 thru 400 Engines with High Axle Ratios. Comes with Our HA817 Hydraulic Flat Tappet Lifters and 3 Piece Double Roller Timing Set
  • Advertised Duration: Intake 278 Exhaust 288, Duration @ .050″: Intake 204 Exhaust 214, Valve Lift: Intake 420 Exhaust 442 Lobe Separation: Intake 107 Exhaust 117
  • Great for Pulling and RV Applications Using Stock Automatic and Manual Transmissions. Best for Use in Engines with 9.5:1 or Less Compression Ratios. Computer Modifications Are Not Normally Required.
  • Street or strip, Engine Pro Performance Camshafts simply out perform the competition. Our manufacturing accuracy promotes improved valve train stability resulting in enhanced power gains. Our “controlled ramp” lobe profiles offer acceleration rates extending valve train life while delivering maximum horsepower. Ground in the U.S.A. with 100% American Made Manganese Phosphate Coated Flame Hardened Castings and Induction Hardened Billets Using Computer Designed Lobe Profiles for Maximum Power.

6. Chevy SBC 350 5.7L HP RV Stage 2 420/433 Lift Cam Camshaft & Lifters Kit Timing

Chevy SBC 350 5.7L HP RV Stage 2 420/433 Lift Cam Camshaft & Lifters Kit TimingBuy On Amazon
  • ENGINE PRO MC1730 Hydraulic Flat Tappet Stage 2 Camshaft, Lifters, +- 4 Degree Adjustable Double Roller Timing Set, Full Gasket Set, Assembly Lube, and ZDDP Oil Additive for 1958-1979 Small Block Chevrolet Engines – 283, 302, 307, 327, 350
  • Smooth Idle with Good Low and Mid Range Torque, 1800-2600 RPM. 1500-4000 RPM Power Range. Strong Torque and Good Mileage in 327 thru 400 Engines with High Axle Ratios. Comes with Our HA817 Hydraulic Flat Tappet Lifters, 3 Piece +- 4 Degree Adjustable Double Roller Timing Set, Full Gasket Set, Assembly Lube, and ZDDP Oil Additive
  • Advertised Duration: Intake 278 Exhaust 288, Duration @ .050″: Intake 204 Exhaust 214, Valve Lift: Intake 420 Exhaust 442 Lobe Separation: Intake 107 Exhaust 117
  • Great for Pulling and RV Applications Using Stock Automatic and Manual Transmissions. Best for Use in Engines with 9.5:1 or Less Compression Ratios. Computer Modifications Are Not Normally Required.
  • Street or strip, Engine Pro Performance Camshafts simply out perform the competition. Our manufacturing accuracy promotes improved valve train stability resulting in enhanced power gains. Our “controlled ramp” lobe profiles offer acceleration rates extending valve train life while delivering maximum horsepower. Ground in the U.S.A. with 100% American Made Manganese Phosphate Coated Flame Hardened Castings and Induction Hardened Billets Using Computer Designed Lobe Profiles for Maximum Power.

7. Stock Cam & Lifter Kit compatible with 1968-79 Chevy 283 305 327 350 400

Stock Cam & Lifter Kit compatible with 1968-79 Chevy 283 305 327 350 400Buy On Amazon
  • INT. Lift 260 Duration 390 EXH. lift .273 Duration .410
  • Melling or Elgin Cam Stock OEM replacement
  • Compatible replacements for Early model SBC Stock engine

8. COMP Cams 7812-16 High Energy 7.794″ Long, 5/16″ Diameter Pushrod Set

COMP Cams 7812-16 High Energy 7.794Buy On Amazon
  • 5/16 inch diameter, 7.794 inch length for Small Block Chevy (stock length)
  • Best choice when building street rods, RVs or daily drivers
  • Meet or exceed all OE pushrod specifications
  • Mate perfectly with High Energyand Magnum Rockers
  • Durable one-piece construction

9. COMP Cams CL12-600-4 Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small Block

COMP Cams CL12-600-4 Thumpr 227/241 Hydraulic Flat Cam and Lifter Kit for Chevrolet Small BlockBuy On Amazon
  • High performance street, stock converter ok, best with 2000+ converter and gears. Choppy/thumping idle.
  • 2,000-5,800 RPM Operating Range
  • 227/241 Duration at .050″. 107 Degree Lobe Separation Angle. 0.479″/0.465″ Valve Lift
  • CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant.
  • Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note. Best with aftermarket converters and more rear gear.
  • Perfect choice for muscle cars and street rods – Three unique cam designs: Thumpr, Mutha’ Thumpr and Big Mutha’ Thumpr deliver excellent horsepower gains and broad torque curve.
  • Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer.
  • Made in USA

10. PRW 0835002 1.5 x 3/8″ Sportsman Steel Roller Tip Self-Aligning Rocker Arm for Chevy 262-400 1987-00 Vortec

PRW 0835002 1.5 x 3/8Buy On Amazon
  • Excellent performance replacement over stock rockers
  • 4340 steel rocker bodies and heat-treated pivot balls
  • Cr40 roller tips
  • PRW RockerLocs included

Leave a Comment