Top 10 Best D Series Engine - Available On Market

【Fitment】Fit for Honda D-Series Engines D15 D16, for Acura.
【Material】Engine valve cover washer bolt kits are made of aluminum alloy for reinforcing durability and style, it can be used for long time.
【Feature】Upgrade your engine compartment with aluminum alloy engine valve cover washer, add an aesthetically appealing and cleaner look to your engine bay.
【Installation】Engine valve cover washeres are easy to install and perfectly fits the original, but professional installation is highly recommend, no instruction included.
【Package includes】5 x Washers, 9 x Mounting Bolts, 5 x O-Ring, 5 x Gaskets.

Direct bolt in fitment for all models of 96-00 Civics (2 bolt driver’s side), manual transmission only
Precision machined from solid aluminum, assembled with steel bracket and sold bushings
Durable bushings prevent engine vibration and combat wheelhop on hard launches
Proper USDM hood clearance with optimum positioning within the engine bay to avoid broken axles
Lifetime warranty valid worldwide

Precision Die-Cast Aluminum. Fine Shot-Blasted Surface Finish
Throttle Body Inlet: 70mm
Compatible w/ OEM Throttle Cable
Precision Machined Brass Throttle Plate
Sealed Ball Bearings for Smooth Operation
Includes New Throttle Body Gasket and Hardware & Idle Adjustment Screws for Fine Tuning
Fits Honda B/D/F/H Series Engines Manual Transmission Only

– Compatible with Honda Acura B & D-series engine (with 2-bolt driver side motor mount) and Manual transmission
– Compatible with 1992-1995 Honda civic, 93-97 delsol, 94-01 integra (most stock integra have 3 bolt driver side mount purchase only if you have 2 bolt driver side post mount)
-65A Street/weekend racer stiffness good for 350hp
– Reduced wheel hop and transfer the most amount of power to the wheel

OEM Part Numbers: 309-05-1050, 309051050, 37830-P7A-N11, 37830-P05-A01, 37830-P0G-S00, 37830-PAA-S00, MHK100590, 079800-4250, 550276, 16400P0AA01, 16400P0AA50, 16400P0AA11, 16400-P0A-A01, 16400-P0A-A50, 16400-P0A-A11
Fitment: 1990-2001 Acu=ra Integra (GS, LS), 1992-2003 Acu=ra Integra (GS-R) ,1994-2001 Acu-ra Integra (GS-R)Require to use Skunk2 Pro Manifold, 1997-2001 Acu-ra Integra (Type R), 1990-1999 Acu-ra Integra (RS), 1992 – 1995 Hon-da Civic All model, 1996-2000 Hon-da Civic (EX, HX), 1999-2000 Hon-da Civic (Si)
Fitments:1996-2000 Hon-da Civic (DX, LX) Require to use Skunk2 Pro Manifold, 1993-1997 Hon-da Del Sol (S, Si), 1994-1997 Hon-da Del Sol (VTEC), 2000-2003 Hon-da S2000 2.0L F20C only, 1992-2001 Hon-da Prelude
Features: 1. Precision Die-Cast Aluminum; 2. Fine Shot-Blasted Surface Finish; 3. Precision Machined Brass Throttle Plate; 4. Compatible w/ OEM Throttle Cable; 5. Sealed Ball Bearings for Smooth Operation; 6. New Throttle Body Gasket and Hardware; 7. Idle Adjustment Screws for Fine Tuning
All our accessories are professionally tested at the factory. Please make sure the project is suitable for your model. Or feel free to contact us for help.

Condition: Brand new and high quality, well packed
Precision CNC machined from billet 6061-T6 aircraft aluminum and come with High Density Wear Resistant Polyurethane bushing inserts.
The mounts are made out of rubber and will allow a large amount of flex when you rev your engine.
These torque mounts will greatly reduce engine movement and allows for better shifting and clutch engagement.
Car will feel much better than before during a launch and in between shifts.

Made from highest quality A356 cast-aluminum
Larger Plenum and oversized runners for maximum power gains
Improved airflow and enhanced venturi effect
Bolt-on fitment compatible with all OEM sensors
66mm throttle body opening can be port-matched up to 70mm
Ideal for turbocharged and naturally aspirated applications
**Not compatible with OEM D-series throttle body. Must use larger-bore Skunk2 throttle body or similar
Fitment: 1988 – 2000 Honda Civic (1.6L CX/DX/EX/GX/HX/LX), 1993 – 1997 Honda Del Sol (1.6L S/Si) and 1988 – 1991 Honda CR-X (1.6L S/Si)

Made from highest quality A356 cast-aluminum
Larger Plenum and oversized runners for maximum power gains
Improved airflow and enhanced venturi effect
Bolt-on fitment compatible with all OEM sensors
66mm throttle body opening can be port-matched up to 70mm
Ideal for turbocharged and naturally aspirated applications
**Not compatible with OEM D-series throttle body. Must use larger-bore Skunk2 throttle body or similar

【Fitment】Fit for Honda D-Series Engines D15 D16, for Acura.
【Material】Engine valve cover washer bolt kits are made of aluminum alloy for reinforcing durability and style, it can be used for long time.
【Feature】Upgrade your engine compartment with aluminum alloy engine valve cover washer, add an aesthetically appealing and cleaner look to your engine bay.
【Installation】Engine valve cover washeres are easy to install and perfectly fits the original, but professional installation is highly recommend, no instruction included.
【Package includes】5 x Washers, 9 x Mounting Bolts, 5 x O-Ring, 5 x Gaskets

Precision Die-Cast Aluminum
Inlet 66mm
Compatible w/ OEM Throttle Cable
Precision Machined Brass Throttle Plate
Sealed Ball Bearings for Smooth Operation
Includes New Throttle Body Gasket and Hardware & Idle Adjustment Screws for Fine Tuning
Fits Honda B/D/F/H Series Engines Manual Transmission Only

Top 10 Best D Series Engine – Available On Market