Skip to content
1. Blue Star Auto Blinker Turn Signal or Tail Light Lens Repair Kit, Amber / Orange Color
- Remove all loose and broken pieces around damaged area.
- Clean lens around area thoroughly with dry cloth or paper towel.
- Hold panel over damaged area to determine size of lens repair panel.
- Position the pane allowing 1/2 inch over lap on all sides of damage.
- If size selected needs to be smaller, trim along the inner grid lines.
2. Blue Star Auto Brake Light / Tail Light Lens Repair Kit, Red Color
3. OCI Butyl Rubber Glue Headlight Sealant Retrofit Reseal Headlight Taillight Hid Adhesive
- Recommended for Aftermarket projector retrofit installation
- Diameter: 9.5MM, Length: 4.57M. Butyl Windscreen Sealant.
- Long enough for 2 headlights.
4. Nilight – TL-01 6″ Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65 Waterproof Stop Brake Turn Trailer Lights for RV Truck Jeep, 2 Years Warranty
- Awesome Brightness: Each tail light has 10 PCS high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.
- Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”
- Upgraded Unique Design: Niligh’s tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires
- Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack
- Universal Application: Work on a 12 V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before you purchase.
- Fit Type: Universal Fit
5. Left – Driver Side Tail Light Assembly – Compatible with 2004 – 2008 Ford F150 (Fits Styleside Except Hrly-Dvsn)
- DRIVER SIDE TAIL LIGHT LENS AND HOUSING; RED LENS; STYLESIDE MODELS EXCEPT Hrly-Dvsn
- Compatible with or fits: 2004 – 2008 Ford F-150 – (Excludes Hrly-Dvsn)
- Quality: Platinum Plus – High quality standard for fit and finish similar to what OEM’s require.
- Left – Driver Side Tail Light Assembly
- Review Description to Ensure Proper Fit
6. NTHREEAUTO Rear Tail Light Lens Red Motorcycle Taillight Cover Compatible with Yamaha Grizzly Kodiak Bigbear Bruin Rhino 450 660
- Equivalent Part Number: 5KM-8472C-10-00
- This aftermarket replacement tail light lens compatible with Yamaha Kodiak Grizzly Bigbear Bruin Rhino.
- The lens is made of ABS plastic, smooth and transparent surface, anti-scratch and waterproof, durable and no faded of long-time exposure, protect the bulbs from water or dirt damage without weakening light, prolong life service time.
- Easy to install, no modification required. The transparent part is facing the license plate light.
- Package includes 1pc red tail light lens cover only, NOTE: Does NOT include rear backing plate and mounting studs. You are backed by 6-Month WARRANTY since order purchase date. Please feel free to contact us if you have any questions.
7. TYC 11-1347-02 Toyota Passenger Side Replacement Tail Light Assembly
- OEM Replacement
- Partslink: TO2809102
- OEM# 81551-89133
- Uses original mounting provisions, no drilling needed to install
- Compliant to DOT (Department of Transportation) & SAE (Society of Automotive Engineers) Standards
- Fit type: Vehicle Specific
8. ECOTRIC Rear Tail Light Lens Taillight Kit Compatible with 2014-2019 Corvette C7 Smoked Molded Acrylic
- Fit 2014-2019 C7 Corvette ALL models including the Stingray, Grand Sport, Z06, Z51 and ZR1 What you get.
- Our molded acrylic rear taillight package is completely different, Not flat like others.Each piece is molded in a die to fit the exact size, shape and contour of your factory tail lamps. These molded acrylic blackouts fit so precise they look like they were installed at the factory.
- Easy to Assemble. Allows light to pass through completely, Give your C7 Corvette more style and upgraded luxury appearance.
- Offer maximum durability and precise performance.Our molded acrylic rear taillight blackout package is not a vinyl or cheap sticker overlay, it’s the real deal hard molded Acrylic blackout kit!Our product is your perfect choice, you can rest assured use.
- NOTE: The tape is not transparent. If you don’t need it, tear it off carefully and wipe it clean with alcohol. Package comes as a complete set of four covers, one for the driver outer lamp, driver inner lamp, passenger outer lamp and passenger inner lamp.
9. Blue Star Auto Lens Repair Kit Multi-Pack
- Repairs Tail Lights, Turn Signals, Markers and Clear Lenses
- Multi-Pack comes with all 3 colors, Red, Amber and Clear!
- Easy to use and takes minutes to repair!
- Just cut and paste!
- Saves you $$ and time!
10. SWEETV Jeweled Baroque Queen Crown – Rhinestone Wedding Crowns and Tiaras for Women, Costume Party Hair Accessories with Gemstones
- ♕ This queen crown is a clustered rich statement piece that has vintage and distinct charm. Classic crown for women and girls
- ♕ Material: crystal, alloy; Color: gold and multicolored
- ♕ Size: Approximately 2.3 inches in height, 5.8 inches in diameter; Weight: 0.46 lb, a little heavy will make you feel like the queen
- ♕ Full crown design matches with gold-plated metal whose surface is dotted with multicolored handmade bead brings out the best in this queen crown
- ♕ Perfect for Halloween, Thanksgiving, Theater, Cosplay, Prom, Birthday, Celebration, Holiday, Anniversary, Wedding, Costume party or for any other special occasion
