Skip to content
1. PetierWeit Heavy Duty Flow Marine Boat Bilge Pump Float Switch can be used in Large Aquarium / Small swimming pool / Water Reservoirs / Fountains
- Wire Length: 1M; Wire gauge size: 18AWG, N.W/N.W: 0.16/0.18
- Turn pump on when water level reaches 2″ ; Turn pump off when water level reaches 3/4″
- Switcheing frequency up to 10 million times; The switch is removable from the base for easy cleaning
- Turn on/off points are consistent and the float pivots smoothly
- Can be widely used in water sampling, high-volume liquid transfer, low-noise continuous workplace; Large aquarium, small swimming pool, water reservoirs, fountains ect
2. Boat Bilge Water Pump 12 V 1100 GPH Electric Marine Bilge Pump and Automatic Boat Bilge Pump Float Switch 12 V 24 V 32 V for Boats, 2 Pieces in Total
- What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily
- Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts); Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m; The float switch’s max amps 12 volts: 20 A; Max amps 24 volts: 10 A; Max Amps 32 volts: 8A; The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG
- Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently; It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure
- Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm); It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning
- Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and most marine, RV, etc.; And it can also be applied in aquarium, small swimming pool, fountain and other places that need drain the water
3. Rule 35A Rule-A-Matic Bilge Pump Float Switch, Mercury Free,White
- A genuine Rule product, don’t settle for anything less
- Year after year, the Rule-A-Matic has been the switch of choice for boaters the world over
- Switch is removable from the base for easy cleaning
- Completely sealed metal capsules enhance flawless operation
- A mercury free snap switch tested to over one million cycles
- Marine grade “blocked” wire
4. MAXZONE Automatic Submersible Boat Bilge Water Pump 12v 1100gph Auto with Float Switch (Blue – Automatic)
- Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M
- Wire Lead(M): 1m; Outlet Diameter: 29mm/ 1.14 Inch (1-1/8″); Width: Approx. 81mm
- Built-in float switch! (No separate float switch is needed)
- No power use until pump is activated by internal float switch (when water level rises)
- Equipped with built in electronic controlled reed sensor system for easy fully automatic operation
5. Rule 37A SuperSwitch Bilge Float Switch, Moisture Tight Seals, 12, 24 or 32 Volt , White
- Rule-A-Matic Float Switch 37A
- Removable base for easy cleaning and servicing
- Mercury-free snap switch tested to over one million cycles and marine-grade blocked wire
- Designed for pumps drawing up to 14 amps at 12 volt DC
6. Five Oceans Automatic Heavy-Duty Bilge Pump Float Switch, 20 Amps, 12-24 Volts, Compatible with Most of the Bilge Pumps, FO-3610-2
- This Five Oceans Heavy-Duty Float Switch is compatible with most 12V and 24V bilge pumps.
- Made of high-grade marine plastic (“corrosion and salt” resistant) and featuring a larger float for increased buoyancy to reduce on/off cycling.
- Turns pump ON when the water level reaches 2 inches (51mm) and turns pump off when water level reaches 3/4 inches (19mm).
- Wire length of 3.3 ft (1m). Switch is removable from the base for easy cleaning.
- Dimensions are 5-1/8 inches (130 mm) x 1-23/32 inches (44 mm) x 2-1/8 inches (54 mm). Mercury free.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products
7. Ogrmar Automatic Boat Bilge Pump Float Switch Moisture Tight Seals 12/24/32VDC Ignition Protected Mercury
- Max Amps 12volts: 20A; Max Amps 24volts: 10A; Max Amps 32volts: 8A. Wire Length: 1M; Wire gauge size: 18AWG.
- Switch is removable from the base for easy cleaning.
- Turn pump on when water level reaches 2” (51mm) ; Turn pump off when water level reaches 0.7” (19mm).
- Long life, switching frequency up to 10 million times; Ultrasonic welding, forming a seal, reliable and secure, not leaking.
- Heavy duty flow switch is designed for the toughest applications; Environmentally responsible.
8. SEACHOICE 19401 Universal Series Automatic Marine Bilge Pump Float Switch for 6V-36V – 50-19401
- Converts DC bilge pumps to automatic operation
- 2,000 gallon per hour capacity
- 36 Volts Strength
- Non-corrosive ABS plastic construction
9. Keep Your Boat Afloat with USS Bilge Pump Switch – JR. – 12 Volt. USS Float Switches, Simply the Best automated bilge switch available
- Ignition protected.Power on indicator light on top.
- Dimensions: Height – 6 1/4” Diameter – 2 ½”
- Current rating- 15A @ 12V. Internal relay rated at 30A.
- Long leads with adhesive wall heat shrink butt-splice connectors installed.
- Positive action, no time delays or electronics
10. Rule 40A Rule-A-Matic Plus Bilge Pump Float Switch, 12, 24 or 32 Volt, Moisture Tight Seals , White , Small
- Sleek and rugged with a strong, fully integrated impact resistant cover to protect against debris and jamming
- 14 gauge highly abrasive resistant marine grade wire
- Built-in test feature
- Designed for pumps drawing up to 20 amps
- Will turn the pump on when the water level reaches 2″ (51mm) and will turn the pump off when water level falls to 3/4″ (19mm)
- Can also be used to operate high water alarm systems
