Skip to content
1. B&M 80675 StarShifter Automatic Shifter
- Take control of your automatic transmission and shift it yourself to maximize torque and performance, or put it in drive for normal automatic operation
- Versatile shifter mechanism can be used as a straight line detent shifter, or lift the trigger in “Low” to convert to ratchet action
- Features backup light switch, neutral safety switch, and NHRA/IHRA reverse lockout,Includes T-Handle and 5′ long shifter cable.Material:Aluminum, steel and plastic base
- Automatic shifters (except cables) are backed by the manufacturer with a limited lifetime warranty
- Application Summary : Fits GM TH400, 350, 250 and 200 automatic transmissions. Also fits Ford Lincoln and Mercury C4 and C6 automatic transmissions. Also fits 1966 and later Chrysler Torqueflite A727 and A904 transmissions. Does not fit TH700R4, TH2004R or AOD automatic transmissions. Cannot be used with reverse pattern manual valve body.
2. ATF
3. NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER FOR 1955-1957 CHEVY WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, TRI-5, BEL AIR, 150, 210, NOMAD, SEDAN DELIVERY, DELRAY
- Brand New Southwest Speed Bolt-in Tubular Transmission Crossmember (SWS Part # 400-7084) | * This Southwest Speed Bolt-In Tubular Transmission Crossmember Is For Installing A Powerglide, TH350, TH400, Or 700R4 Automatic Transmission In A 1955, 1956, 1957 Chevrolet 150, 210, Delray, Bel Air, Sedan Delivery, And Nomad. | * Unfortunately, It Will Not Work With Any Of The Convertible Frames That Have The X-Braced Frame, That Encases The Drive Shaft
- This Is Extremely Helpful When You Are Trying To Install Newer Model Engine And Transmission Combinations In The 55-57 Chevy | * This Crossmember Moves The Rear Engine/Transmission Mounting Location From The Bottom Of The Bellhousing To The Tail Housing On The Transmission And Will Work With Either The Stock Rubber Or Urethane Tail Housing Mounts To Isolate Vibrations | * This Isn’t A Universal Fit Unit | * This Is A Direct Bolt-In, Also Increases Exhaust Pipe Clearance In Critical Areas
- Features: | * Adjustable Mounting Brackets | * Made From Heavy Gauge Steel Tubing | * Includes All Hardware To Mount Crossmember | * Black Powder Coated To Resist Corrosion
- Crossmember Specs: Center Crossmember Overall Width 32″ Crossmember Tube Outside Diameter: 1-1/2″ | * Mounting Hardware Specs: | * Two Black Powder Coated Offset Frame Rail Mounting Brackets | * Two Bolts And Washers, Center Crossmember To Tail Housing Mount | * Four Self-Tapping Bolts, Offset Brackets To Frame Rails | * Four Long Mounting Bolts With Nuts And Washers, Crossmember To Offset Brackets
- Applications: | * 1955-1957 Bel Air | * 1955-1957 Chevy 150 | * 1955-1957 Chevy 210 | * 1955-1957 Chevy 210 Delray | * 1955-1957 Nomad | * 1955-1957 Sedan Delivery | **Note: Will Not Fit Convertible Frames With X-brace Encasing Drive Shaft**
4. B&M 80680 MegaShifter Truck/SUV Automatic Shifter
- Take control of your automatic transmission and shift it yourself to maximize torque and performance, or put it in drive for normal automatic operation
- Ratchet style shifting mechanism eliminates overshifting, and it’s cable operated for quick installation and accurate shifting
- Features backup light switch, neutral safety switch, lighted gear indicator, and NHRA/IHRA reverse lockout
- Includes T-Handle and 5′ long shifter cable
- Automatic shifters (except cables) are backed by the manufacturer with a limited lifetime warranty
5. Muncie 4-Speed Transmissions: How to Rebuild and Modify (Workbench How-to)
- S-A Books Muncie 4 Speed Transmissions How to Rebuild and Modify Book P/N 278
6. B&M 80842 Pro Ratchet Automatic Shifter for 3 and 4 Speed Transmission
- Automatic shifter with racing inspired style and performance
- Ratchet style shifting mechanism eliminates overshifting, and it’s cable operated for quick installation and accurate shifting
- Features backup light switch, neutral safety switch, and NHRA/IHRA reverse lockout
- Includes B&M Pro Ratchet shifter knob and 5′ long Super Duty race shifter cable
- Automatic shifters (except cables) are backed by the manufacturer with a limited lifetime warranty
7. SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER FOR 1947-1959 CHEVY/GMC TRUCKS WITH POWERGLIDE,TURBO TH 350,TH 400,700R4,MUNCIE,SAGINAW,3 & 4 SPEED,TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE
- Southwest Speed Bolt-In Tubular Transmission Mount For 1947-1959 Chevy And GMC Truck’s |* This Is A Trim-To-Fit Tubular Crossmember (SWS Part # 400-7088) |* This Tubular Transmission Crossmember Is For Installing Late Model Automatic And Manual Transmissions In 1947-1959 Chevy And GMC Truck’s |* Adjustable To Fit Frame Rail Spacing Of 26″ To 36″ |* The Transmission Crossmember Bolts Directly To 1947-1959 Chevy And GMC Truck Frame Rails, And Will Then Accept The Later Model Transmissions
- Installation Of This Crossmember Will Allow You To Install A Powerglide, TH350, TH400, Or 700R4 Automatic Transmission, As Well As Muncie And Saginaw, 3 And 4 Speed Manual Transmissions | * This Crossmember Is Shipped Complete And Includes The Necessary Hardware To Mount The Crossmember | * Crossmember Requires The Use Of The Polyurethane Or Stock Rubber Tail Housing Mount (Not Included)
- Features: | * Trim-To-Fit To Fit Your Custom Application | * Adjustable End Caps That Adapt To Frame Rail Spacings From 26″ To 36″ | * Made From Heavy Gauge Tubular Steel Tubing | * Includes Mounting Hardware Pictured | * Black Powder Coated To Resist Corrosion
- Crossmember Specs: | * Fits Frame Rails 26″ To 36″ Inside To Inside | * Center Tube Length End To End: 30-3/8″ | * End Caps: 4-3/8″ Long Per Side | * Crossmember Tube Outside Diameter: 1-5/8″ | * Crossmember Tube Inside Diameter: 1-3/8″ | * End Caps Outside Diameter: 1-7/8″ | * End Caps Inside Diameter: 1-3/4″
- Mounting Hardware Specs: | * Two Mounting Bolts With, Lock Washers And Flat Washers, Center Crossmember To Tail Housing Mount | * Two Mounting Bolts With Nuts And Lock Washers, Center Crossmember To End Caps | * Four Mounting Bolts With Nuts And Lock Washers, End Caps To Frame Rails | * Applications: | * 1947-1959 Chevy Truck | * 1947-1959 GMC Truck
8. ONNURI For 2008-2010 Chevrolet Malibu 2.4L AUTO 4 Speed Motor&Trans Mount Set 4pcs : A5370, A5590, A5598, A5355 – K2452
- OE Specification and design
- Life Time replacement warranty (One time for PARTS ONLY)
- Free expedited shipping (ships within 1 business day except holidays)
- High quality steel and rubber ensures a smooth and quiet ride
- Send us a message with the VIN# & Transmission type. We’ll find the right parts for you.
9. NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER FOR 1963-1972 CHEVY AND GMC TRUCK’S WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, C10 C20 C30 C15 C25 C35 1000 1500 2500 3500 3000 3500 C1500 C2500 C3500
- Brand New Southwest Speed Bolt-In Tubular Transmission Crossmember For 1963-1972 Chevy And GMC Trucks (SWS Part # 400-7096) | * This Southwest Speed Bolt-in Tubular Transmission Crossmember Is For Installing A Powerglide, TH350, TH400, Or 700R4 Automatic Transmission In A 1963-1972 Chevy And GMC Truck | * This Crossmember Will Also Work With GM Manual Transmissions Including Later Model Muncie And Saginaw 3 And 4 Speed Manual Transmissions
- This Isn’t A Universal Fit Unit. This Is A Direct Bolt-in For The 1967-1972 Chevy And GMC Trucks, But Will Require Drilling The Mounting Holes On The 1963-1966 Chevy And GMC Trucks | * The Tubular Crossmember Also Increases Exhaust Pipe Clearance In Critical Areas | * This Crossmember Is Shipped Complete And Includes The Necessary Hardware To Mount The Crossmember | * Crossmember Requires The Use Of The Polyurethane Or Stock Rubber Tail Housing Mount (Not Included)
- Features: | * Made From Heavy Gauge Steel Tubing | * Includes Mounting Hardware Pictured | * Black Powder Coated To Resist Corrosion
- Crossmember Specs: | * Overall Length: 33 1/8″ | * Tube Length End-To-End: 29 3/8″ | * Crossmember Tube Outside Diameter: 1 5/8″ | * Mounting Hardware Specs: | * Four Mounting Bolts With Nuts And Washers, Crossmember To Frame Rails | * Two Mounting Bolts With Flat Washers And Lock Washers, Center Crossmember To Tail Housing Mount
- Applications: | * 1963-1972 Chevy C10 Pickup | * 1963-1972 Chevy C20 Pickup | * 1963-1972 Chevy C30 Pickup | * 1963-1966 GMC 1000 Pickup | * 1963-1966 GMC 1500 Pickup | * 1963-1966 GMC 2500 Pickup | * 1963-1966 GMC 3500 Pickup | * 1963-1966 GMC 3000 Pickup | * 1963-1966 GMC 3500 Pickup | * 1967-1972 GMC C15/C1500 Pickup | * 1967-1972 GMC C25/C2500 Pickup | * 1967-1972 GMC C35/C3500 Pickup | * We Also Have The 1963-1972 GMC And Chevy Truck Polyurethane Mounts To Go With This Automatic Transmission Crossmember
10. 4 Speed Manual Transmission Shift Pattern T-shirt Car Buff
- 4 Speed Manual Transmission Shift Pattern T-shirt Car Buff will appeal to car buffs who know very few people today know how to drive a manual transmission.
- Knowing how to drive a manual transmission impresses members of the opposite sex and puts you ahead of the competition. Celebrate with this great t-shirt.
- Lightweight, Classic fit, Double-needle sleeve and bottom hem
