Top 10 Best Chevy Inline 6 Engine Based On User Rating

Cast aluminum
Water pump riser solves the common problem of the fan being mounted too low on the radiator to be effective
Raises the pump and mechanical fan 5″ higher in the engine compartment
Provides mounting surfaces for an A/C compressor and alternator
Riser housing comes with brackets and hardware

【1-Barrel Carburetor】This replacement carburetor carb fit for GMC for Chevrolet 4.1L 250 and 4.8L 292 L6 engines.Fit for Chevy C10 1975-1981 and 1983-1984.Please note the carburetor replace for 1-barrel carb,not 2-barrel carb
【Carburetor Size】Bolt holes diameter: 74.5mm;Intake valve diameter: 42.8mm;Choke valve inner diameter: 47.5mm;Choke valve outer diameter: 66.5mm
【High Quality Material】This carburetor made of heavy duty zinc alloy construction.Type:Automatic choke
【Specifications】Part Numbers: 7043014,7043017,7047314,7047317,17054303,17054228.Package Contents: 1x 1-Barrel carburetor with choke thermostat and mounting gaskets as picture shows
【Made for Performance】Improve engine performance.Low fuel consumption and start fast.Stable idle speed,allowing you to get a better driving experience and maneuverability.To ensure the carb work normally,please clean the automobile oil circuit and air filter before you install the carburetor

Chevy straight/inline 6 cylinder chrome steel valve cover with two chrome steel side plates.
Fits 1962-74 Chevy 194-230-250-292 straight/inline 6 cylinder engines.
Height: 3-1/2″.

Brand New Pair of O.E. Replacement Rear Engine Mounts that fits 1955-1957 Chevy’s with Small Block and Big Block Chevy V-8 Engines, and Inline 6 Cylinder Engines with Manual Transmissions (SWS # 400-6902) > These mounts actually bolt to the bell housing, and are used for supporting the rear of the engine > The engine mounts on your Tri-Five Chevy are crucial for reducing vibration and extending the life of your engine and its components
This Pair of O.E. Replacement rear engine mounts are fabricated from longer lasting and more durable rubber > These Bell Housing Mounts connect the Chevy Bellhousing to the 55-57 Tri-Five Chevy Frame
These Rear Engine Mounts fit all Small Block and Big Block Chevy V-8 Engines, and Inline 6 Cylinder Engines > Note: These Rear Engine Mounts only fit 1955-1957 Chevy’s with Manual Transmissions
Features: > O.E. Replacement Mounts > Fits Manual Transmissions > Includes both sides > Durable and longer lasting rubber mounts > Connects the Chevy Bellhousing to the 1955-1957 Chevy Frame > Fits Small Block and Big Block Chevy V-8 Engines, and Inline 6 Cylinder Engines > Includes mounting hardware
Factory Applications: > Fits Small Block and Big Block Chevy V-8 Engines, and Inline 6 Cylinder Engines with Manual Transmissions for the applications listed below: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1955-1957 Chevy Delray > 1955-1957 Nomad > 1955-1957 Sedan Delivery

Heavy Duty — Complete HEI Distributor constructed from CNC-machined billet aluminum housing and hardened steel dual bushing construction built to last
Specifications — Magnetic Trigger Style, Mechanical and Vacuum Advance Type, Male Cap Style, Internal Coil Type, and 6 Cylinders
Coil Spark of 7,500 RPM — High voltage of up to 65,000
Compatible with Chevrolet Chevy GM GMC Truck Late Model Inline 6 Cylinder 230 250 292 , Cast Iron Hydraulic or Solid Flat Tappet Camshafts
Package Inclusions — 1 x A-Team Performance 65K Coil Complete HEI Distributor 7500 RPM Compatible With Chevrolet Chevy GM GMC Truck Late Model Inline 6 Cylinder 230 250 292 One Wire Installation Red Cap

Brand New Southwest Speed O.E. Replacement Front Engine Mount Kit that fits 1955-1957 Chevy’s (SWS # 400-6892) > The engine mounts on your Tri-Five Chevy are crucial for reducing vibration and extending the life of your engine and its components > This Southwest Speed engine mount kit includes the shafts, rubbers, washers, nuts, and lock washers that are usually missing or worn out on the 1955-1957 Chevy
This mounting kit connects the Chevy Motor Mounts to the 1955-1957 Chevy Engine Cross Member, and will do both the left side and right side, and includes everything pictured to restore the mounts back to new condition > This Southwest Speed front engine mount kit fits Small Block Chevy V-8 and Inline 6 Cylinder Engines
Features: > O.E. Replacement > Includes both sides > Durable and longer lasting rubber bushings > High strength steel shafts > Connects the Chevy Motor Mounts to the 1955-1957 Chevy Engine Cross Member
Fits Small Block Chevy V-8 and Inline 6 Cylinder Engines > Includes the shafts, rubbers, washers, nuts, and lock washers > Note: This kit does not include the front engine mounting brackets
Factory Applications: | Fits Small Block Chevy V-8 and Inline 6 Cylinder Engines for the applications listed below: > 1955-1957 Chevy Bel Air > 1955-1957 Chevy 150 > 1955-1957 Chevy 210 > 1955-1957 Chevy Delray > 1955-1957 Nomad > 1955-1957 Sedan Delivery