Skip to content
1. ECCPP Coilover Struts Spring Shocks Assembly Adjustable Strut Shock Suspension Full Set fit for 1994-2001 for Acura Integra /1992-2000 for Honda Civic /93-1997 for Honda Civic del Sol
- APPLICABLE MODELS- The Coilover Struts Spring Shocks fit 1994-2001 Acura Integra /1992-2000 Honda Civic /93-1997 Honda Civic del Sol(Note: if you car model is 1994-2001Acura Integra, For Need spacers for rear coilover only)
- SPECIFICATIONS- Adjustable height, Non Adjustable camber plate, Non Adjustable Damper
- SPRING RATE -2 piece front( 8kg/1), 2 pieces rear (6kg/1)
- FEATURES OF COILOVER SUSPENSIONS KITS- Direct Replacement Easy Installation, Bushings included for a complete installation, saving time and labor.
- WHAT YOU GET- Coilover Suspensions Kits, High-quality after-sales service and technical staff . We provide one year warranty and 100% quality assurance. Please check the description to confirm the compatibility car models before purchase
2. Range Technology Active Fuel Management Disable Device (Blue)
- Keep your vehicle in V8 mode! Disable 4 cylinder mode on all GM Active Fuel Management Vehicles.
- Installs in seconds! Plugs into diagnostic port with no tools needed.
- Does not reprogram factory ECU. Leaves no trace.
- Full power all the time. Increased throttle response and more consistent power delivery across the entire power band.
- Best for high load scenarios, such as towing, off-road, icy or snowy conditions or high speed commuting.
3. GOOACC 635Pcs Car Push Retainer Clips & Auto Fasteners Assortment -16 Most Popular Sizes Nylon Bumper Fender Rivets with 10 Cable Ties and Fasteners Remover for Toyota GM Ford Honda Acura Chrysler
- 【UNIVERSAL FIT KIT】- The kit contains 16 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that you’ll always have the right size.
- 【TOP QUALITY】- These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
- 【PREFECT FOR WHAT YOU NEED】 – Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
- 【BONUS ACCESSORIES】- We provide different size fastener removers and cable ties to help you quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
- 【WIDE APPLICATION】- Professional push clips are widely used for car panel, door trim, bumper and fender for GM Ford Toyota Honda Chrysler etc.
4. Detroit Axle – Front Struts w/Coil Springs Sway Bars Rear Shock Absorbers Replacement for Chevrolet Malibu Maxx Pontiac G6 Saturn Aura – 6pc Set
- For Models with 11.8″ Center-to-Center Sway Bar Links
- Fits: Specific Models – Check Fitment Chart and Product Description for Accurate Information
- Includes: 2x Front Strut Complete Assembly + 2x Front Sway Bars + 2x Rear Strut Shock Assembly
- Detroit Axle Strut Assemblies are complete and ready for installation with no additional work or special tool required for installation
- 10-Year Warranty
5. ACDelco Specialty 519-32 Front Spring Assisted Shock Absorber
- Constant rate front coil springs can help improve stability and maintain ride height
- Variable rate rear coil springs provide 500 lbs (per pair) of load capacity. Not to exceed vehicle gvwr (gross vehicle weight rating). The product does not increase payload
- Seamless drawn-over-mandrel (dom) tubing decreases internal component wear, resulting in longer service life. Compressed length: 8.67 inch
- Super finished, chromed, piston rod provides anti-corrosion properties, a more consistent wear surface, proper seal lubrication, and longer product life
- Real-world tested to ensure that the shocks will fit intended vehicles and applications. Compressed Length-8.67 inch. Extended Length-13.28 inch. Stroke Length-4.61 inch
- Fit type: Vehicle Specific
6. Gabriel 43167 Rear Load Carrier
- Combines shock and spring technology
- Constant-rate front coil springs can help improve stability and restore or maintain ride height
- Variable-rate rear coil springs provide 500 lbs. per pair of load capacity [Not to exceed vehicle GVWR (Gross vehicle Weight Rating). product does not increase payload]
- An economical solution for heavier duty use
- Rear: Ford: 1980 – 96 Bronco, 1990 – 97 F Super Duty, 1980 – 83 F-100, 1980 – 96 F-150
- Rear: Ford: 1980 – 97 F-250, 1997 F-250 HD, 1980 – 97 F-350, 1997 F-450 Super Duty, 1990 – 11 Ranger
7. Godspeed MSS0950 MonoSS Coilover Lowering Kit, Fully Adjustable, Ride Height, Spring Tension And 16 Click Damping, compatible with BMW 3-Series (E30) RWD 1985-91 51mm
- Compatible With BMW 3-Series RWD (E30) 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993; Requires To Weld OE Spindle Onto Front Lower Bracket; 51mm Outer Strut Diameter
- Spring Rate (Front/Rear) : 8 kg/mm/10 kg/mm; Damping Levels: 16 Rebound Force Levels
- 52mm Mono-Tube Stainless Steel Shock With 16 Levels of Damping Adjustment Corresponds to Daily Driving Scene To The Sunday Track
- Performance Internal Piston With Koyo Japan 6204z Bearing Provides Smooth Stroke; Powder Coated CNC Machined Aluminum And Carbon Steel Accessories; Independent Spring Tension And Height Adjustment; Racing Grade Shock Oil With High Viscosity Index; Shock Absorber Can Be Rebuild When Worn Out
- Full 1 Year Limited Warranty From Date Of Purchase; Install By Experienced Professionals Is Highly Recommended
8. Pedders 160064 Xa Adjustable Coilover Suspension Kit for Pontiac G8
9. Motor Trend FlexCover Waterproof Car Cover for Rain Wind All Weather XL Fits up to 210″
- Distinguished Brand – Motor Trend’s Very Own Multi-Layer Car Cover Engineered to Protect Your Vehicle
- Single Blend Polyester Cover – Provides Basic Coverage for Snow Rain & Sun (UV Protection)
- Double Check your Measurements for Fit. For Lengths Bumper-to-Bumper up to 210″
- Includes Compact Storage Bag. Manufacturer Backed 1 Year .
- Includes Lock & Cable Set which Provides Security from Theft & Light-Medium Winds
10. OEMTOOLS 25553 MacPherson Strut Spring Compressor, Heat-Treated Thread Rod Strut Compressors, Coil Spring Compressor w/ Forged Hooks, 9″ Threaded Length
- EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool; Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench
- SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work; Our strut compressor features detent pins that keeps the strut spring in place during compression; Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor
- STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly; Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor
- WON’T BEND DURING USE: Don’t rely on cheaper material to get a dangerous job done; Our durable heat-treated threaded rods on our strut coil spring compressor ensures a smooth compression of strut springs without bending the threaded rod
- WORKS ON MOST VEHICLES: Features a threaded length of 9”, making it compatible with most vehicle’s MacPherson strut springs; Attach the threaded rods so that the hooks are set 180° apart; Evenly compress both sides of the strut spring compression tool
