Skip to content
1. Clymer Honda GL1800 Gold Wing (2001-2010) (53206)
- Factory sealed in plastic.
- Produced by Haynes.
- Complete Maintenance and repair information.
- Detailed photos and illustrations guide you through every job.
- Easy to find and easy to use do-it-yourself content.
2. S SIZVER Weld-On Universal Muffler 5.5″ Wide Euro Oval Tip T-304 Stainless Steel Weld-on Muffler Exhaust 2.5″ Inlet
- ✔BUYER BEWARE: Please only make purchase WHEN acknowledging what these are; These are Universal Muffler designed to fit MOST vechile; Compatible List shows “FIT” certain vehicle because they are UNIVERSAL! Major modification is needed and these require welding as well! Restocking fee will be applied on all purchases.
- ✔CAUTION: Due to installation to weld-on the muffler, an extended piping might be required and charged my your mechanic.
- ✔THIS PRODUCT RECOMMENDS PROFESSIONAL INSTALLATION. Any damage during installation will not be refunded
- ✔The muffler provides a deep and smooth tone and Made From High Quality T-304 stainless steel
- ✔Package includes: 1 x Exhaust Muffler ;
3. Yonaka 2.5″ Stainless Steel Performance Catback Exhaust Compatible/Replacement for 1988-1991 Honda CRX Si
- Fully polished stainless steel
- 2.5″ mandrel bent piping
- 4″ stainless steel exhaust tip
- Clean, deep hum, without the irritating mid range raspy sound
- Direct bolt on fit to OEM, all installation hardware included
4. Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz – 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor – 150<
- Stable at 1 ohm | Remote Subwoofer Level Control Included
- Highly Efficient Heatsink Design allows for Maximum Reliability & Performance
5. Resonator Pipe Muffler Exhaust System Kit Fits 2006-2009 Subaru Legacy 2.5L
- Direct Fit
- Fits SUBARU LEGACY 2.5L 2006 – 2009
- RESONATOR AND MUFFLERS
- FREE GASKES
- THIS WILL NOT FIT THE THE 2.5L TURBO MODELS
6. DNJ EG290 Exhaust Manifold Gasket for 1986-1995 / Acura, Honda/Civic, Civic del Sol, CRX, Integra / 1.5L, 1.6L / DOHC, SOHC / L4 / 16V, 8V /D15B2, D15B6, D15B7, D15B8, D15Z1, D16A1, D16A6
- THIS IS BRAND NEW: DNJ® Exhaust Manifold Gasket
- FITS: 86-95 Honda, Acura / Civic, Civic del Sol, CRX, Integra 1.5L-1.6L L4 SOHC, DOHC Naturally Aspirated D16Z6,D15B7,D16A6,D15B2,D16A1
- FITMENT NOTES: Exhaust
- DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks.
- We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run
7. Borla 14411 Cat-Back System Exhaust
- Made of corrosion resistant aircraft quality stainless steel which decreases the fatigue incurred on these parts during high performance uses
- BORLA uses patented straight-through and multi-core technology to help increase horsepower and torque.
- Precision manufactured using aircraft-quality stainless steel, guaranteed to look like new for one million miles.
- Includes a rear exit single round angle-cut intercooled tip
8. BORLA 140595 S-Type Cat-Back Exhaust System
- Product type :AUTO PART
- country of origin :United States
- Package dimensions :26.67 cm L x71.12 cm W x111.76 cm H
- package weight :48.0lbs
9. Evergreen IEV4026 Compatible With 88-95 Honda Civic Del Sol CRX 1.5 1.6 SOHC D15B1 D15B2 D15B7 D16A6 Intake Exhaust Valves (with Valve Stem Seals)
- Fits: 88-95 Honda Civic Del Sol CRX 1.5 1.6 SOHC D15B1 D15B2 D15B7 D16A6 (see description below)
- Made from premium stainless steel and manufactured to the highest quality specifications
- Increased durability and less wear under extreme conditions, easily lasting 3 times longer than the OEM valves
- A one-piece, forged construction offers high strength and fatigue properties
- Will work with stock springs and valve-train, without the need of any further piston, head, or engine modifications
10. Flowmaster Super 44 Mandrel-Bent Aluminized Dual Truck Exhaust Kit w/Chrome Tips for Silverado, Sierra, F-Series & Ram
- Performance Dual Exhaust for Ram, Ford F-Series, Silverado & Sierra trucks
- Single 3″ inlet /Dual 2.5″ outlet Flowmaster Super 44 Muffler
- Two 2.5″ high-flow mandrel-bent tailpipes, cut and swedged
- Two 3.5″x18″ WELD-ON angle-cut chrome tips
- Multi-depth insulated hangers & muffler clamps