Skip to content
1. Intake Manifold Gasket Set – Compatible with 4.8L 5.3L 6.0L Chevy Silverado, Suburban, Tahoe, GMC Sierra, Yukon, Savana, Cadillac Escalade – Replace 89060413 MS98016T
- INTAKE MANIFOLD GASKET KIT – Responsible for sealing the intake manifold against the cylinder heads. If you have problems like engine missfire, coolant leaks, engine overheating, or decrease in power, acceleration, and fuel economy, you might need to replace your intake manifold gasket.
- FIT THE FOLLOWING VEHICLES – Intake Manifold Gasket Set compatible with 4.8L 5.3L 6.0L 6.2L GM Vortec engine, including Chevy Silverado, Suburban, Tahoe, Trailblazer, Express, Colorado, Avalanche, GMC Sierra, Yukon, Savana, Canyon, Envoy, Cadillac Escalade, Buick Rainier, Hummer H2, H3, H3T, Isuzu Ascender, Saab 9-7x, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014.
- REPLACE PART NUMBERS – Replace GM 89060413, replace Fel-Pro MS98016T Ms92211 Ms18007 Ms4657 Ms16340. Commonly found on Chevy Silverado, Suburban, Tahoe, Trailblazer, Express, Colorado, Avalanche, GMC Sierra, Yukon, Savana, Canyon, Envoy, Cadillac Escalade, Buick Rainier, Hummer H2, H3, H3T, Isuzu Ascender, Saab 9-7x with 4.8 5.3 6.0 V8 Vortec Engine.
- OEM DESIGN & DIRECT FIT – Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine ACDelco for Fel-Pro intake manifold gasket, but it works even better and lasts longer. Save yourself times and money by replacing intake manifold gaskets yourself.
- WHAT YOU’LL GET – 1 Set of Intake Manifold Gaskets Set & 12 Months Warranty. If you have any problem with our intake manifold gasket, feel free to contact us, we will sort things out together.
2. Compatible with Chevy Silverado Thoe Suburban/GMC Sierra Savana Yukon/Cadillac Escalade Upper Intake Manifold
- ▶️ 100% Brand New, Never Been Used
- ▶️ One Piece Design
- ▶️ Re-Engineered reinforced plastic
- ▶️ Intake Gaskets Molded into the Intake Manifold
- ▶️ Direct Replacement for Factory Manifold
3. Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0
- Turbo Kit T70 Single T4 Silverado Sierra Turbocharger Vortec V8 LS 4.8 5.3 6.0
- Cast passenger and driver side manifolds
- Stainless TIG welded crossover
- 38mm external wastegate
- -4AN oil feed kit with adapter plate + Hardened stainless hardware
4. FEL-PRO MS 98016 T Intake Manifold Gasket Set
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
5. Vincos Intake Manifold Gasket Ms92211 Ms18007 Ms4657 Ms16340 Compatible with Tahoe 00-03 5.3l 4.8l Silverado/Sierra 01-03 6.0L Silverado/Sierra/Yukon XL/Suburban/Avalanche 1500 02 03 5.3L
- ✔ 【 SEALED WELL】It securely seals the gasket set so that oil leaks will be prevented each time it pools lubricant oil as it goes to the cylinder head’s drain back opening. Aside from oil, this gasket also helps prevent the entry of other harmful materials to the valve train.
- ✔ 【HIGHLY DURABLE】It is highly durable and less prone to breakage. to provide exceptional service life and reliability.
- ✔ 【WITHSTAND HARSH CONDITIONS】Advanced manufacturing technology ensures durability and optimum operation in higher or lower temperatures.
- ✔ 【PROFESSIONAL CUSTOMER SERVICE】Vincos has the professional production technology.We inspected every product before sending out,to ensure you have the best quality product,and the best value.If you have any problem please contact us.For more effectively helpness, please let us know your car make model and show the issue by pictures .We would take highly attention of your opinions and demands,to improve our products and service for you.Enjoy your shopping time.
- 【NOTE】The attachment to the gasket set must be just right-not too tight and not too loose. Any of these two conditions can ruin the gasket’s efficiency; consequently, the valve cover itself.
6. APDTY 103944 Exhaust Manifold Anti-Corrosion Flanged Bolt (Set of 12; M8-1.25; Grade 10.9) (Direct Fit For The Models Listed In Compatibility Chart)
- Meets Or Exceeds OEM Specs
- Factory OEM Fit Form And Function
7. BLACKHORSE-RACING 4″ Cold Air Intake System Kit with Heat Shield Filter Compatible with Chevy GMC 1999 2000 2001 2002 2003 2004 2005 2006 V8 4.8L/5.3L/6.0L(Black)
- 【Specification】Dimensions: (9.67 x 11.81 x 9.45)” / 950 x 30 x 24)cm (L x W x H).
- 【Cold Air Intake Kit 】It’s the ultimate performance Cold Air Intake Kit with Heat Shield, The air intake kit can help your engine to draw in more cold air resulting in better throttle response and higher explosive horsepower output.
- 【Advantage】High quality and efficient air intake system, fits automatic and manual transmission, the filters are washable, reusable and easy to install with tools commonly available.
- 【Efficacy】Designed to increasing 8-10% horsepower & 6-10% torque, and creating an attractive intake noise.
- 【Compatible with】1999 2000 2001 2002 2003 2004 2005 2006 V8 4.8L/5.3L/6.0L(Don’t fit 2006 ford f250 lariat 6.0).
8. Z Whip LS Truck Intake Manifold Bolt Kit Compatible with all Chevy Truck V8 Intake Manifolds 1999-2013 Vortec 4.8L 5.3L 6.0L 6.2L Engines Silverado Tahoe Yukon Suburban Trailblazer TBSS Bolts
- Compatible With Chevrolet & GMC Trucks Silverado Sierra Yukon Tahoe Express Suburban 1500 2500 3500 Trailblazer TBSS. 1999to 2013 4.8L 5.3L 6.2L and 1999-2015 6.0L engines.
- These are High Strength Grade 10.9 (Same Grade as OEM bolts) metric flange bolts Clear Zinc Coated to prevent rust and corrosion.
- Comes with 10ea M6x70mm Bolts and 10ea M6 washers.
- We are an AS9100D and ISO 9001:2015 Certified Manufacturer that produces aerospace parts for The Boeing Aircraft Company and The US Military. Parts we produce fly at 30,000 feet where failure is not an option. We put the same quality into every part we produce.
- When you purchase Z Whip Parts you will always get the highest quality for your vehicle that you rightfully deserve
9. FEL-PRO MS 98000 T Intake Manifold Gasket Set
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- STRONG AND DURABLE — Features molded rubber over an aluminized steel carrier which resists high heat and coolants
- SUPERIOR SEAL — Proprietary rubber sealing beads help eliminate potential leak paths for a superior seal
- EASIER TO INSTALL — Locating tabs assure proper alignment and easier installation
- PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
10. Top10 Racing Intake Manifold fit 102mm Throttle Body Sheet Metal Fabricated EFI 15° Throttle Opening Compatible with Chevrolet Chevy GMC Pontiac LS LS1 LS2 LS6 Black(ONLY Intake Manifold)
- Compatible for Cathedral Port LS1/LS2/LS6 Heads,For Specific Model Compatibility, please check the model list in the descriptionFor
- Hardware – 3mm (1/8″) Thick T6061 Sheet Aluminum Construction
- Fit for Throttle Body – 102mDurability – the Intake Will Not Bend or Flex With Boost or Vacuumm Bore Throttle Body Openings (Throttle Body not include)
- Durability – the Intake Will Not Bend or Flex With Boost or Vacuum
- Fabrication by Tig Welded Aluminum