Top 10 Best Lowering Springs For Mk7 Gti Reviews With Scores

by

1. Skar Audio RP-1500.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1500W

Skar Audio RP-1500.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1500WBuy On Amazon
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,900 Watts | RMS Power at 1 Ohm: 1,500 Watts
  • Frequency Response: 20Hz – 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow
  • Stable at 1 ohm | Remote Subwoofer Level Control Included
  • Highly Efficient Heatsink Design allows for Maximum Reliability & Performance

2. Godspeed LS-TS-TA-0009 Traction-S Performance Lowering Springs, Reduce Body Roll, Improved Handling, Set of 4

Godspeed LS-TS-TA-0009 Traction-S Performance Lowering Springs, Reduce Body Roll, Improved Handling, Set of 4Buy On Amazon
  • Fits 2012, 2013, 2014, 2015, 2016, 2017 Toyota Camry All Models; Average Lower: Front: 1.2″ Rear: 1.3″; Spring Rate(kg/mm): Front: 2.7 | Rear: 1.75
  • Avg. Drop(Front/Rear): 1.2″/1.3″; Spring Rate(Front/Rear): 2.7 kg/mm/1.75 kg/mm
  • Enhances on-road vehicle performance quicker turn-in, enhanced steering response and improved cornering.; Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime; Powder Coat Finished For Corrosion Protection
  • Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks; Lowered While Maintain Ride Comfort
  • Engineered to ensure against rattling, clunking or rubbing even when pushed to the limit.; Lifetime Limited Warranty On Material Defect And Craftsmanship

3. R9-HS2-061_1 compatible with Volkswagen Golf R/GTI (MK7) 2015-20 Hyper-Street II Coilover Kit w/ 32-Way Damping Force Adjustment (54.5mm) Lowering Kit by Rev9, 32 Damping Level Adjustment

R9-HS2-061_1 compatible with Volkswagen Golf R/GTI (MK7) 2015-20 Hyper-Street II Coilover Kit w/ 32-Way Damping Force Adjustment (54.5mm) Lowering Kit by Rev9, 32 Damping Level AdjustmentBuy On Amazon
  • Compatible With Volkswagen Golf R / GTI (MK7) 2015 2016 2017 2018 2019 2020; Excludes Electronic Suspension; 54.5 mm Front Axle Clamp
  • Spring Rate (Front/Rear) : 7 kg/mm (392 lbs/inch)/5 kg/mm (280 lbs/inch); Damping Levels: 32 Ways
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment; Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately
  • These Coilovers are “Lowering Kit” and DOES NOT adjust to Factory Ride Height. No Installation Instructions; Install By Experienced Professionals Recommended

4. Godspeed LS-TS-VN-0002-C Traction-S Performance Lowering Springs For Volkswagen Jetta (MK7) 2019-21

Godspeed LS-TS-VN-0002-C Traction-S Performance Lowering Springs For Volkswagen Jetta (MK7) 2019-21Buy On Amazon
  • Compatible With Volkswagen Jetta(MK7) S/SE/SEL/R-Line 2019 2020 2021
  • Avg. Drop(Front/Rear): 1.5″/1.5″; Spring Rate(Front/Rear): 3.6 kg/mm/4.7 kg/mm
  • Enhances on-road vehicle performance quicker turn-in, enhanced steering response and improved cornering.; Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime; Powder Coat Finished For Corrosion Protection
  • Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks; Lowered While Maintain Ride Comfort
  • Engineered to ensure against rattling, clunking or rubbing even when pushed to the limit.; Lifetime Limited Warranty On Material Defect And Craftsmanship

5. Stay Tuned Performance PU/519/PCF Carbon Fiber Print Front Bumper Body Kit Splitter Lip 3PCS Compaitble with 2014-2020 Golf GTI MK7

Stay Tuned Performance PU/519/PCF Carbon Fiber Print Front Bumper Body Kit Splitter Lip 3PCS Compaitble with 2014-2020 Golf GTI MK7Buy On Amazon
  • Please USE Amazon auto compatible list to ensure fitment! This kit is designed for 2014-2020 Golf GTI MK7; (Fits Mk7 / Mk7.5 Models Only)
  • CAUTION: These are NOT REAL carbon fiber. They are Carbon Fiber Print over plastic only
  • Installation instructions are not included. Please simply test-fit the item before installing. It requires drilling/screw on underneath the bumper section to mount and secure the bumper lid. Professional Installation is recommended. If any question, please contact seller to arrange possible options.
  • 100 percent Brand New that has never been used or installed! Gives your vehicle an improved appearance and Style
  • 100 percent MBG! Money-Back-Guaranteed! If you are NOT happy with your purchase. Please contact us first before filing any claims. You can simply do that by going into your Amazon orders, click Sold by: ”OVERUN”-”Ask a question” on top right-type in your message. We will resolve your issue within 24 hours. 🙂
  • Part number: D-2-PU-519-PCF
  • Fit type: Vehicle Specific

6. Godspeed (LS-TS-VN-0002) Traction-S Lowering Spring Set For VW Golf GTI 2015+UP (MK7) gsp set kit

Godspeed (LS-TS-VN-0002) Traction-S Lowering Spring Set For VW Golf GTI 2015+UP (MK7) gsp set kitBuy On Amazon
  • GODSPEED TRACTION-S SPRINGS FOR VW GOLF GTI 2015-UP(MK7)
  • Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime
  • Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks
  • Average Drop: Front: 1.2″ Rear: 1.3″
  • Lifetime Limited Warranty On Material Defect And Craftmenship

7. Godspeed LS-TS-FD-0006-C Traction-S Performance Lowering Springs, Reduce Body Roll, Improved Handling, Set of 4, compatible with Ford Mustang Coupe 1999-04

Godspeed LS-TS-FD-0006-C Traction-S Performance Lowering Springs, Reduce Body Roll, Improved Handling, Set of 4, compatible with Ford Mustang Coupe 1999-04Buy On Amazon
  • Compatible With Ford Mustang 1999, 2000, 2001, 2002, 2003, 2004; Excludes COBRA with Rear Independent Suspensions
  • Avg. Drop(Front/Rear): 1.75″/1.75″; Spring Rate(Front/Rear): 5KG kg/mm/4.11 kg/mm
  • Enhances on-road vehicle performance quicker turn-in, enhanced steering response and improved cornering.; Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime; Powder Coat Finished For Corrosion Protection
  • Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks; Lowered While Maintain Ride Comfort
  • Engineered to ensure against rattling, clunking or rubbing even when pushed to the limit.; Lifetime Limited Warranty On Material Defect And Craftsmanship

8. Godspeed LS-TS-VN-0002-A Traction-S Performance Lowering Springs, Reduce Body Roll, Improved Handling, Set of 4, compatible with Volkswagen Golf GTI (MK7) 2015+UP

Godspeed LS-TS-VN-0002-A Traction-S Performance Lowering Springs, Reduce Body Roll, Improved Handling, Set of 4, compatible with Volkswagen Golf GTI (MK7) 2015+UPBuy On Amazon
  • Compatible With Volkswagen Golf GTI (MK7) 2015, 2016, 2017 2018 2019 2020 2021
  • Avg. Drop(Front/Rear): 1.2″/1.3″; Spring Rate(Front/Rear): 3.6 kg/mm/4.7 kg/mm
  • Enhances on-road vehicle performance quicker turn-in, enhanced steering response and improved cornering.; Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime; Powder Coat Finished For Corrosion Protection
  • Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks; Lowered While Maintain Ride Comfort
  • Engineered to ensure against rattling, clunking or rubbing even when pushed to the limit.; Lifetime Limited Warranty On Material Defect And Craftsmanship

9. APR SUS00002 Roll-Control Lowering Springs – MK7 GTI

APR SUS00002 Roll-Control Lowering Springs - MK7 GTIBuy On Amazon
  • Reduced body roll
  • Lowers the vehicle 1/2″-3/4″
  • More attractive stance
  • Lower center of gravity
  • Compatible with OEM dampers

10. Whiteline WSK-VWN005, Volkswagen Golf GTI MK7 Lowering Springs for 2015-2017

Whiteline WSK-VWN005, Volkswagen Golf GTI MK7 Lowering Springs for 2015-2017Buy On Amazon
  • Track tested to provide optimal performance enhancement
  • Lowers the center of gravity to provide better corner handling
  • Front lowering height: 1.38 inches/front spring rate: 236 in/pounds
  • Rear lowering height: 1.18 inches/rear spring rate: 246 in/pounds

Leave a Comment