Skip to content
1. A-KARCK Hardwood Flooring Jack, Quick Release Plank Jack Fits All Thicknesses of Floors for Hands-Free Nailing
- RATCHETING FLOORING JACK: Place the jack against the wall, pull or push the tongue & groove floor planks into place and hold them. Eliminates using pry bars or crowbars.
- QUICK RELEASE: Using a clever ratchet structure, the pressure will be quickly released by pushing the handle all the way forward.
- FREE YOUR HANDS: With leverage, the jack can provide the required force in a narrow space. After the ratchet is fixed, the jack will tighten your flooring for hands-free nailing.
- FOR ANY FLOOR THICKNESS: Can be used with all thicknesses of flooring from 5/16″ to 3/4″, making it easier to install hardwood floors.
- PREVENT INJURY: It is recommended to use additional tape to make the surface softer to ensure that the board surface will not be scratched.
2. SUIZAN Japanese Flush Cut Trim Hand Saw 5 Inch Pull Saw for Hardwood and Softwood
- JAPANESE STYLE PULL SAW: This product is a “Pull Saw.” What most people are used to are European saws, which cut materials via pushing, thus are called “push saws.” On the other hand, Japanese saws cut materials via pulling and thus are called “pull saws,” which is what this product is. In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
- JAPANESE STEEL: All Suizan japanese saws are consisted of top quality japanese steel. It uses high quality Japanese steel, which makes cuts to be sharp.
- BLADE FOR HARDWOOD AND SOFTWOOD: You can easily cut oak, sandalwood, ebony, mahogany, maple, walnut and pine by robust blade for hardwood. The blade for softwood can be used for white cedar, Japanese cedar, larch, paulownia wood and so on.
- MADE IN JAPAN: All SUIZAN products are manufactured in Japan by Japanese master craftsmen.With a history of over 100 years in making japanese hand tools, all of the process gone into making tools were completed in one of Japan’s towns known for their craft making tradition.
- DIVERSIFY YOUR WOODWORKING LIFE: No matter you are a master or a beginner in using saws, it gives you brand new experience from using traditional Japanese style saws and enables you to make a wider variety of woodworking products, thus change your life!
3. WORKPRO Laminate Wood Flooring Installation Kit with Reinforced Double-Faced Mallet, Heavy Duty Pull Bar, Tapping Block and 30-Piece Spacers Included
- ✅Reinforced Mallet: Constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 90±5 HAS. The double-faced solid PVC head delivers a softened, positive strike. The mallet head is 1-3/8 inch in diameter. The handle is made of American hickory which is lightweight but tough. The whole mallet is 10-3/4 inch long and weighs 1.036lb.
- ✅Enhanced Pull Bar: Made from premium A3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. The soft pads on the back can well protect the floor from scratch.
- ✅Solid Tapping Block: The tapping block made from of polypropylene is designed solid, which is more sturdy and durable. The approximate size of the block is 7-7/8 x 2-1/2 x 3/4 inch.
- ✅30-Piece Spacers: The kit comes with 30 pieces plastic spacers which are designed with non-slip slots. The approximate size of the spacer 2-3/8 x 1-1/8 inch.
- ✅The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality. You are always welcomed to contact us for warranty service whenever there is any problem with the product.
4. REXBETI 43-Piece Laminate Wood Flooring Installation Kit with 40 Spacers, Tapping Block, Heavy Duty Pull Bar and Diameter 1 3/8″ High-Strength Fiberglass Handle Mallet, Non Slip Soft Grip
- high-strength mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 1 3/8 inch in diameter(other brands usually is 1″)that can provide more powerful force.The handle is made of fiberglass will not break, fell apart and handle bent.The whole mallet is 11 inch long and weighs 0.89lb
- upgraded pull bar is designed with enhanced strength, more longger and thicker than others.Others are usually only 1/8 inch thick, 10 1/2 inch long and easily deformed.Ours is 3/16 inch thick, 12 inch long is heavy duty.2 soft pads on the back help to prevent scratching your floor during installation
- tapping block is made from solid polypropylene material, it is durable for long use, suitable for most types of floors
- 40 spacers included to allow you install a large flooring area more convenient and easier
- package included 1 x rubber hammer; 1 x pull bar; 1 x tapping block; 40 x spacers.It is professional use for laminate or hardwood flooring installation
5. COMOWARE Circular Miter Saw Blade- 10 inch 80 Tooth, ATB Premium Tip, Anti-Vibration, 5/8 inch Arbor Light Contractor and DIY General Purpose Finishing for Wood, Laminate, Plywood & Hardwoods
- UNIQUE DESIGN: PREMIUM TIP, ANTI-VIBRATION DESIGN, LARGE TEETH. General purpose finishing and the 80 teeth tip is made of VC1 tungsten carbide which adds the saw blade’s sharpness and provide extended life of saw blade. The large tooth design allows the blade to be safely sharpened more times. Larger spacing between the teeth is more convenient for chip removal and heat dissipation.
- HIGH QUALITY CARBIDE MATERIAL: Provide the best cutting experience, with good cutting performance. Prolong the service life of Saw Blade, and add the sharpness.
- WIDELY USE: The 10″ saw blade has a 5/8″ diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use.
- EXCELLENT ATB STYLE: The ATB style which adds the cutting speed and durability. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time.
- USE GUIDE: The equipment should be equipped with the safety protection device. When not in use, hang the saw blade away from the damp place to prevent rust.
6. BOSCH T503 3-Piece Hardwood/Laminate Flooring T-Shank Jig Saw Blade Set
- Includes two T101BF clean for hardwood, and one T101AOF special for laminate
- Bi-Metal construction for durability and long life
- Blades are optimized for straight and curved cuts in hardwood and laminated flooring
- 3 piece set
7. ROBERTS – 44494 Roberts 10-25 Universal Tapping Block 2.75″ x 9.25″ x 0.50″
- Gently pushes the tongue and groove or edges of resilient vinyl tile, laminate or hardwood flooring planks together creating a tight seam
- Unique combination edge design for use with most types of flooring
- Durable polypropylene body is built to last
- Use with a mallet only
8. SKIL 3601-02 Flooring Saw with 36T Contractor Blade, Red and black
- Cuts solid, engineered and laminate flooring with ease
- Makes cross, miter and rip cuts
- Lightweight design for transport and use at any project location
- Miter detents at 0, 22.5 and 45 degrees
- Die-cast aluminum miter and rip fence
9. Bestgle Tongue and Groove Router Bit, Set of 2 Grooving Router Bit 3/4″ Stock 3 Teeth T Shape 1-3/8 Inch Diameter Wood Milling Saw Cutter Door Flooring Woodworking Tools, 1/2 Inch Shank
- Industrial Quality Router Bits, Micro-grain Tungsten Carbide Woodworking Cutters
- 1/2-inch shank, Teeth width: 1/4 inch, Teeth depth: 1/4 inch, 3/4-inch Stock Thickness, Overall Dia. 1-3/8 inch(33mm)
- 3 Teeth T-shape Solid Hardened Steel Bodies with Anti-Kickback Design
- Ideal tools for handmaking a drawer or other woodworking, cut all composition materials, plywoods, hardwoods, and softwoods
- Note: Not suitable for cutting ferrous metal and non-wood materials, such as: steel, iron, sand, etc
10. Norske Tools NCSBP272 8-1/4 inch 60T Melamine Plus Saw Blade For Ultra-smooth Cutting of Melamine, Laminates, Hardwoods and Laminate Flooring 5/8 inch Bore with Diamond Knockout
- The ULTIMATE finishing blade; features special 35 degree high ATB tooth design for ultra-smooth cutting of melamine, laminate, hardwoods and laminate flooring
- C4 Micro-grain carbide tips precision sharpened on all sides
- Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation
- For professional carbinet makers, trim carpenters and avid Do-It-Yourselfers
